 7afte wont start |
  |
 Jul 13, 2005 - 12:43 PM
|
 
|
 Enthusiast  Joined Oct 10, '04 From New Jersey Currently Offline Reputation: 0 (0%)  |
i was letting my car warm up one day a noticed that the RPMS were acting weird, i reved the engine and they went up stoped, came down went up, got stuck and fell back to 1K, then died. i relized my o2 sensor was blown and my plugs were shot, so i replaced the plugs and theirs still no spark. WTF is wrong with my car!?!?!?!!?
|
|
Jul 13, 2005 - 12:54 PM
|
|
 Enthusiast Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
QUOTE(StreetRacing10PSI @ Jul 13, 2005 - 10:43 AM) i was letting my car warm up one day a noticed that the RPMS were acting weird, i reved the engine and they went up stoped, came down went up, got stuck and fell back to 1K, then died. i relized my o2 sensor was blown and my plugs were shot, so i replaced the plugs and theirs still no spark. WTF is wrong with my car!?!?!?!!? [right][snapback]311979[/snapback][/right] so did you pull one of the plugs and cranked the motor and didnt see any spark check them all then the distributor like the cap and rotor -------------------- yea your 3sgte is cool but ill stick to my 7agte
|
|
Jul 13, 2005 - 1:50 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
do you have the right heat range plugs as well?
but yea check wires cap and rotor and double check your connections |
|
Jul 13, 2005 - 4:32 PM
|
|
|
Enthusiast Joined Oct 10, '04 From New Jersey Currently Offline Reputation: 0 (0%) |
i pulled the plug and their was no spark, and i took apart the distributor cap and their were all these lil metal shavings in their.
|
|
Jul 13, 2005 - 11:58 PM
|
|
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
time for a new cap/rotor/button set!
|
|
Jul 14, 2005 - 10:02 AM
|
|
|
Enthusiast Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
QUOTE(StreetRacing10PSI @ Jul 13, 2005 - 2:32 PM) i pulled the plug and their was no spark, and i took apart the distributor cap and their were all these lil metal shavings in their. [right][snapback]312056[/snapback][/right] metal shavings can you see where they came from? you might need a hole new distributor start with replacing the cap and rotor and go from there -------------------- yea your 3sgte is cool but ill stick to my 7agte
|
|
Jul 14, 2005 - 8:40 PM
|
|
|
Enthusiast Joined Oct 10, '04 From New Jersey Currently Offline Reputation: 0 (0%) |
ends up that when i replaced my coil pack a wire was in the way of the distributor which caused it to snap. its up and running now tho
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 7:04 AM |