My 3s swap, Need help with getting it completed Options

[celicast3sgte]

ok so here is what im going to start off with i cant get too much into detail because i am in a hurry to leave for a camping trip in like 3 hours.. so I need a 3s alternator, someone to do the 7a-fe to 3s-gte harness conversion i have a complete 7a harness and a cut 3s-gte harness, i also need a map sensor, and i would like to get a FMIC in place while all this is taking place, also i have a gt tranny that i am going to use so i think i need that lower cross member for the gt mounts. anyways any and all help is needed and appreciated i would like to see this car running in a month or 2 tops so that is my goal.

[Consynx]

i have a FMIC, 2 couplers, 12 T-Clamps, and 2 hump pipes...Black, and from High Temp silicone.
the IC is 28" from end-tank to end-tank, and is 6" high...bar and plate design and has 2.5" inlet and outlet(couplers, T's and humps are 2.5")

[DG_Performance]

Consynx, you are lying! I have your intercooler.... you can have it back when you pay me $30 you owe me. Or i can sell it to celicast3sgte for 30 bucks......haha
dg

edit:
i might be able to help you out with the harness if you send me pics of how bad it is cut and where it was cut
dg


This post has been edited by DG_Performance: Aug 3, 2005 - 10:45 PM

[Consynx]

oh crap, you're right, lol
i thought it was upstairs.

[DG_Performance]

haha .... i am holding it hostage!