 quick question about stock gt front strut bar |
  |
 Nov 19, 2005 - 11:01 AM
|
 
|
|
Enthusiast  Joined Jul 27, '04 From phoenix az Currently Offline Reputation: 0 (0%)  |
hey guys what mm bolts are soposed to screw in the 2 mounting spots on the fire wall on the stock gt front strut bar?
|
|
Nov 19, 2005 - 11:24 AM
|
|
|
Enthusiast Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) |
14mm
|
|
Nov 19, 2005 - 1:29 PM
|
|
 Enthusiast Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
$1.99 for 2 at autozone.
This post has been edited by LewFX: Nov 19, 2005 - 1:29 PM --------------------  |
|
Nov 20, 2005 - 12:01 AM
|
|
|
Enthusiast Joined Jul 27, '04 From phoenix az Currently Offline Reputation: 0 (0%) |
thanks a lot for your help guys.
|
|
Nov 20, 2005 - 12:46 AM
|
|
 Enthusiast Joined Feb 7, '03 From Northern Virginia Currently Offline Reputation: 23 (100%) |
i went to my used toyota dealership & got them free. just look thru their box-o-nuts&bolts
|
|
Nov 20, 2005 - 2:21 AM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE(purplegt4 @ Nov 20, 2005 - 12:46 AM) [snapback]357445[/snapback] i went to my used toyota dealership & got them free. just look thru their box-o-nuts&bolts i got a big bag full of nuts and bolts i took off from my clip for stuff like that..hahaha -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Nov 20, 2005 - 5:41 AM
|
|
|
Enthusiast Joined Feb 7, '03 From Northern Virginia Currently Offline Reputation: 23 (100%) |
yea every shop basically has one! my drawer didn't have these bolts that's why i went up there! i just took the box out to my car and trial & errored.
|
|
Nov 22, 2005 - 12:38 AM
|
|
|
Enthusiast Joined Jul 27, '04 From phoenix az Currently Offline Reputation: 0 (0%) |
ok guys its not 14mm its prab going to be a 12mm im guessin.14MM DID NOT FIT!
|
|
Nov 22, 2005 - 10:26 AM
|
|
 Enthusiast Joined Jun 13, '05 From Poughkeepsie, NY Currently Offline Reputation: 2 (100%) |
lol good old reliable 6gc.net knowledge lol
--------------------  Kawi Love |
|
Nov 22, 2005 - 11:59 AM
|
|
|
Enthusiast Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
QUOTE(trdevelopment @ Nov 22, 2005 - 12:38 AM) [snapback]358252[/snapback] ok guys its not 14mm its prab going to be a 12mm im guessin.14MM DID NOT FIT! it is 14mm, because i just bought em for my c-one. mayube the thread on yours is bad. -------------------- |
|
Nov 22, 2005 - 1:42 PM
|
|
|
Enthusiast Joined Aug 31, '02 From KC Currently Offline Reputation: 0 (0%) |
10 or 12mm, bolts are measured by the thread diameter and pitch, 14mm is the wrench size, so probably 10mm,
be sure you get the correct pitch also, those come in 1.0, 1.25 or 1.5 threads per mm pitch. body bolts are usually the coarser thread, so most likely a 10x1.0. Whatever size it is, be SURE it will start and go in at least 3 or 4 turns by hand before you put it together, dont force anything. |
|
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 12th, 2024 - 6:40 AM |