How to replace a steering wheel?, Failed DMV inspection. Options

[percyv143]

Hi. I need to change back to my old stock steering wheel since it failed the DMV inspection. I have a Momo steering wheel. I know I can remove the rubber on the front and expose small allen type screws.. How do I replace it. Is it by removing those allen screws will remove the cover(?) and expose the nut to remove the whole steering wheel? Thanks.

[Hanyo]

after you take off all the screws, you will be left with one big nut at the middle of the steering colum. You need a press tool to help pull the wheel off the car.
after that just re-install your other steering wheel.

[percyv143]

If I don't have a press tool, can I still take it out manually? Is a press tool like a "puller"? Thank you.

[Hanyo]

press and puller tool is the same thing. You can try to remove it with out the tool. But i would be alot harder.

[Coomer]

I do believe that aftermarket hubs usually aren't pressed on very tight. Once you remove the nut, the hub may remove without a puller.