FS / Service / Interior Master Window Switch Options

[Project95St202]

Hello every one on 6GC.Net, I have been working on my wife's 6 generation Celica now for 4 months. Seems like everything is going well, Some parts has to be located & some has to be custom made. As I was working on the interior lighting section of the car I came along seeing (Gauge, AC / Heat Control, Clock, Window Switch, Dome Light, & Etc). Which bring me to write ... I have seen a lot of 6GCer's with they're gauges with different lights & they look very well done, but does every interior light match the gauge? To me when some has to be done everything should be matched (Including even the little lights that you could barley see).
I have finished the second part of my puzzle of interior light, which some of you probably already have done it, some of you probably never thought about it & some of you probably really don't care.
The master window switch has a little light (Driver side window switch) which is green, which it make it pretty ugly when you have blue gauge's. I have changed mine & it came out more then perfect which it matches the lighting of the gauges.
I am more then willing to do this for you for the price of $5.00 on each window switch, but that's not the final price.
The price you are looking to pay is :
Labor: $5.00
Light Bulb: $3.00 (I Only Use PIAA's & 2 Color Choices "Bright Blue / Hyper White")
Shipping: Getting to me you will find a best price delivery price that you can find, but me sending it back to you will cost ... (Depending on locations)
Fed Ex 5 Days Ground ~ $8.00 ~ $12.00
Fed Ex 2 Days Express ~ $20.00 ~ $25.00
UPS 5 Day Ground ~ $9.50 ~ $12.00
UPS 2 Day Air ~ $21.32 ~ $25.00
So the total comes out to $8.00 excluding the shipping, If you have the right skill of doing this your self then have fun & good luck because it will really look nice.
But if not I am willing to make a little change for your Celica, If you need pictures please PM me & I'll be more then happy to take 1 ~ 100 picture for you if you needed.
THANKS FOR LOOKING

[o0black0o]

Not to be an ass.. But you do know almost everyone here can do this themselves..

[Batman722]

Not to be an ass.. But you do know almost everyone here can do this themselves..
[right][snapback]344521[/snapback][/right]

true and there is a link for a how-to in the interior sticky. But if someone doesn't know how to solder and has no experience with LEDs, then this would be helpful.

[Project95St202]

Not to be an ass.. But you do know almost everyone here can do this themselves..
[right][snapback]344521[/snapback][/right]

Well a** or not I have already stated (If you have the right skill of doing this your self then have fun & good luck because it will really look nice) I'm just trying to be helpful for people who dosen't have the time or soldering skills that's all.