FS: GT Brembo Cross drilled rotors, Front and Rear combo Options

[soulshadow]

I have for sale 2 front side rotors for the GT and 2 rear rotors as well. These are cross drilled and made by Brembo. Im planning to trade in the celi so I won't be needing them anymore for a conversion. They are in the box, but I have opened them for an inspection. Never used or installed, because I had an ST so they didn't even fit.

Im asking for $200
($180 for the rotors
and $20 shipped.)

They have been garaged kept and are still brand new.
PM me if you are intrested I can knock down the price if you can give me another best offer!

[CelicaZR]

Could you post some pics please?

[celiracer]

pics please? and are they stock size rotors? or bigger? cause i want big ones for my 18s

[soulshadow]

These are for the rear.


These are for the front

The rotors are really big, at least for the ST. I compared them to the stock rotors on the ST and I was like crap! They won't fit cause they were made for the GT and they are BIG!

[celiracer]

They fit perfectly on my GT then? if they just get put on that easy i'll think about taking them outa your hands.

[soulshadow]

They fit perfectly on my GT then? if they just get put on that easy i'll think about taking them outa your hands.

If you know what your doing, such as removing the calipers and the bracket and then tapping the rotors out. Than its a piece of cake. Takes me less than 15 mins to remove a drive axel, so it should take you even less ( really easy stuff). And yes they should fit since they were made for the GT.

This post has been edited by soulshadow: Nov 28, 2005 - 12:22 PM

[creis]

Theis are Great Breaks I have em on my car, there way better then stock, I use ceramic pads on mine with much success.

the install is not a 15 min task, once you lift up the car take the tires off, remove the calipers and pound the old disks off (for each wheel) you gana be under about an hour or so for all, more if your less exsperianced in the process. but well worth the time.

This post has been edited by creis: Nov 29, 2005 - 12:07 AM

[celiracer]

Ok. well then it will be a peice. My dads been a mechanic for 30 years and i've been working with him for a while on cars. So ya. But how much did you say $200 shipped? and what all am i getting? just the rotors? or with the calipers also?

[soulshadow]

Ok. well then it will be a peice. My dads been a mechanic for 30 years and i've been working with him for a while on cars. So ya. But how much did you say $200 shipped? and what all am i getting? just the rotors? or with the calipers also?

These are just all 4 rotors for a GT conversion, If I had the GT calipers I would have installed them myself LOL!

Like I said $200 shipped to your door.
I take paypal cause its faster and I can ship it ASAP!
But if you don't have paypal u can send payments via check or money order.

Theis are Great Breaks I have em on my car, there way better then stock, I use ceramic pads on mine with much success.

the install is not a 15 min task, once you lift up the car take the tires off, remove the calipers and pound the old disks off (for each wheel) you gana be under about an hour or so for all, more if your less exsperianced in the process. but well worth the time.

Actually thats just for the front cause I've worked on them before, but yah its about an hour or so depending on how good you are for all 4.

[LewFX]

these are actually regular brembos that someone cross drilled and slotted, brembo did not drill them. another point to remember is you can not trim or cut cross drilled rotors. but gl with the sale on those nice rotors.

[soulshadow]

these are actually regular brembos that someone cross drilled and slotted, brembo did not drill them. another point to remember is you can not trim or cut cross drilled rotors. but gl with the sale on those nice rotors.

Really? They have a smooth finishing and the drilling is precise like a laser-guided machine driller. The rotors are also very thick and heavy. I don't know why someone would waste their time drilling them and calling them cross drilled Brembo rotors. But research must be made!

[soulshadow]

these are actually regular brembos that someone cross drilled and slotted, brembo did not drill them. another point to remember is you can not trim or cut cross drilled rotors. but gl with the sale on those nice rotors.

Really? They have a smooth finishing and the drilling is precise like a laser-guided machine driller. The rotors are also very thick and heavy. I don't know why someone would waste their time drilling them and calling them cross drilled Brembo rotors. But research must be made!

Ok after some searching it seems that these were custom made.
Visit this site they do the custom work!
Overall, They are brembo but have been customized.

http://www.autoaccessorystore.com/home_n.a...ir=detail&id=49

[celiracer]

Hmm. Well if nobody else takes them. I'll prolly take them But i'm doing a lot of summer projects so im gonna have to wait a lil bit to see how my money all works out. But if you still have them and i have money i'll take them. But if someone else wants them go ahead and let em have um. But if not and you still have them when im ready then thats a good thing for me lol.

[soulshadow]

Its still up for grabs so if anybody wants them just PM me.
I can go as low as $170, but you will pay for all of shipping and no I do not do $170 shipped.

[Stealths95GT]

what's the shipping to 98315

[soulshadow]

what's the shipping to 98315

Sorry I didn't see this now untill today......But for sure it ain't cheap.
Anyways, Im dropping the price down to $150 Cause I might move soon and I have no way to install these on my car. You can either pick em up or I can send it VIA USPS using there flat rate box. I hope it works.. Cause its only $8 per box and they did say any weight. LOL! So let me confirm that the box fits and works and I will get you an exact total for all 4 rotors.

[celiracer]

$150? I GOT EM DIBS. I'll talk to my dad and see if they would be good. since he's a mechanic and i'll buy them if you can wait till next friday thats when i get paid.

And its for all 4 rotors right??

This post has been edited by celiracer: Dec 2, 2005 - 7:38 PM

[Coomer]

Can you take pictures of the part numbers and Brembo engravings on the edges of the rotors? I'm interested in them.

[elvasoshexai]

uh. i'll take em for $150 as long as they fit gt for sure. and if celiracer doesn'tr want it

[celiracer]

I'll take $150 and pay shipping if you need me to. PM me and lets talk. thanks