 Wheel bearings & Hub, How to put the spindle on |
  |
 Jan 18, 2006 - 3:51 PM
|
 
|
 Enthusiast  Joined Dec 16, '02 From Cincinnati, Ohio Currently Offline Reputation: 0 (0%)  |
There was a post a couple of weeks ago that had the link of the wheel beraing and hub, but no spindle. I'd like to do it myself, but how does hte spindle get taken off and put back on? I've never really looked at how its put together.
Thanks, Jeremy heres a link of the part Bearing and hub This post has been edited by Jeremy1210: Jan 18, 2006 - 3:53 PM |
|
Jan 18, 2006 - 4:13 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
i believe its pressed in
|
|
Jan 25, 2006 - 8:52 AM
|
|
 Enthusiast Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
You don't have to take off the spindle. But if you want you can do it with a TORX bit. Its like a hexagon shaped bit used for removing the spindle.
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 4:44 PM |