![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast Joined Sep 11, '05 From chandler,arizona Currently Offline Reputation: 0 (0%) ![]() |
I have a auto transmission on my 95 celica and i wanted to change it to manual and i was wondering if it will have a long term effect on the car.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 30, '03 From O-town, FL Currently Offline Reputation: 0 (0%) ![]() |
Yes, it will have a long term effect on the car..
Your car will be stickshift. I have done it, what do you want to know, there's a lot and I don't know everything. -------------------- |
![]() |
|
Enthusiast Joined Sep 11, '05 From chandler,arizona Currently Offline Reputation: 0 (0%) ![]() |
well like since the car is built with a auto won't the ECU display and error and what could I do
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) ![]() |
QUOTE(dav0924 @ Jan 17, 2006 - 11:38 PM) [snapback]380202[/snapback] well like since the car is built with a auto won't the ECU display and error and what could I do replace the ECU with a manual trans one ![]() if you get all the parts from a parts car, swap the ECU too -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 30, '03 From O-town, FL Currently Offline Reputation: 0 (0%) ![]() |
The ECU doesn't matter to be honest with you. I have an auto ECU. You can swap it if you want but make sure you get the same year. I don't know why you would though. Perfectionist i suppose. If you don't, the O/D light will blink all the time. Easy solution is to yank the bulb, which I have done.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) ![]() |
QUOTE(Akimbo @ Jan 18, 2006 - 5:40 AM) [snapback]380220[/snapback] The ECU doesn't matter to be honest with you. I have an auto ECU. You can swap it if you want but make sure you get the same year. I don't know why you would though. Perfectionist i suppose. If you don't, the O/D light will blink all the time. Easy solution is to yank the bulb, which I have done. You have an OBDI, on any OBDII car, that is, '96 and newer, the check engine light will go on and throw a code. You can get around this by installing a resistor box that poses as the tranny solonoids into the wiring harness. Which I can build for anyone who wants one. But since you have a '95, you've got nothing to worry about. -Doc This post has been edited by Dr_Tweak: Jan 18, 2006 - 5:41 PM -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 4, '03 Currently Offline Reputation: 0 (0%) ![]() |
read my how-to http://www.6gc.net/index.php?action=howto&itu=127
seems everyone has forgotten about it after coom moved it to the how to section. -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 4:10 PM |