5SFE fuel injectors, what's the best way to get to them? Options

[Drolius]

What is the best approach to removing the fuel injectors from the 5SFE??? Please let me know....Thanks!

-Eddie-

[1bwilson]

You have to pull the head... Atleast pull the valve cover.

-Bryan-

[Drolius]

Thanks Bryan...I'll give it a shot.

[jayi12-15psi]

how do you remove the valve cover?

[1bwilson]

I believe the 4 nuts around the spark plug wires hold the valve cover in place.. I have yet to try it but thats what i have read. Might have to give it some help with "ye ole rubber mallet".

-Bryan-

[1bwilson]

Drolius,

Where did you get the flywheel? what brand is it and are you happy with it?

-Bryan-

[Drolius]

Bryan,

I got the flywheel from unorthodox racing, it is the ultra L aluminium flywheel (10Lbs.) I have had it for a few months now and personally I have enjoyed it since. I think if you are going to modify any car especially ours one of the most benefitial and smart mods to do is the flywheel. Just doing this mod will bring "muscle" if you will that the engine needs...IMO it's a must! Although, unorthodox's flywheels are a bit pricey, but worth it. There are other alternatives though, off the top of my head I beleive a company called fidanza makes one for about $200+ opposed to $500+. Hope this was helpful, please feel free to e-mail or PM me if you have a question. Take it easy!

-Eddie-

This post has been edited by Drolius: May 28, 2003 - 10:33 PM