When lights turned on some inticators haze over, How to prevent this? Options

[malpaso]

I hope I'll be able to explain what I want .

When lights are turnded on some indicators (clock, led indicators of climate contol) will haze over (brighting less). When I turn lights off, those indicators bright more again. Anybody knows how to switch this off? I want same intensity of bright all the time (that higher one intensity)...

This post has been edited by malpaso: Apr 10, 2006 - 4:07 AM

[Batman722]

there are 4 wires going to the clock, cut the green wire and it will not dim when you turn your lights on.

for the CC, I do not know...

[malpaso]

there are 4 wires going to the clock, cut the green wire and it will not dim when you turn your lights on.

for the CC, I do not know...

I'll try that for the clock... (I hope there are any green wires ) thanks.

[hmongtaejien]

I'll try that for the clock... (I hope there are any green wires ) thanks.

worked?

[tomazws]

I'll try that for the clock... (I hope there are any green wires ) thanks.

worked?

If it does work, when you drive at night, is the clock a little too bright for you? Or it is just fine?

[Hawkins Corp]

I just read about this and cut the green wire, i personally like it. Not to bright at all.

[malpaso]

It's not just about the clock and not about "too bright"...it's about all LED indicators and clock and about dim when you turn lights on... example this:



Uf... I hate my ability write in english .

To hmongtaejien: "cut green wire" solve just clock dim problem not all inicators dim problem -> I didn't try yet.

[hmongtaejien]

To hmongtaejien: "cut green wire" solve just clock dim problem not all inicators dim problem -> I didn't try yet.

hehe yeah i understand that part. i just wanted to know if you tried and did it work. how it looked... etc.