Headers, found via fleabay Options

[LewFX]

Okay im bored, what are anyones thoughts on these headers?


http://cgi.ebay.com/ebaymotors/CHROME-HEAD...sspagenameZWDVW



http://cgi.ebay.com/ebaymotors/CHROME-HEAD...sspagenameZWDVW


http://cgi.ebay.com/ebaymotors/94-99-TOYOT...sspagenameZWDVW

[Jaws4God]

those look nice! now i just need some money!

[bindertch]

[quote name='LewFX' date='Mar 25, 2006 - 3:18 AM' post='412846']
[quote]Okay im bored, what are anyones thoughts on these headers?[/quote]

Ok this first set looks good but the pic isn't of the actual item because the bottom end is wrong. It sounds good the way they describe the equal lenghths and if it is the entire header and down/flex pipe I would go for it.
[quote]http://cgi.ebay.com/ebaymotors/CHROME-HEAD...sspagenameZWDVW[/quote]

This one looks ok but the stock down/flex pipe is used and the O2 part is photo shopped to show that they can put either fitting depending on what you use. Probably would be easy to install if you don't have that much rust and the cat separates from the lower pipe.
[quote]http://cgi.ebay.com/ebaymotors/CHROME-HEAD...sspagenameZWDVW[/quote]

Ok this seller sells the cheapest headers for the most rip-off prices. Unfortunately I found out the hard way. I will show you tomorrow at the meet what I mean. These are made out of regular steel pipe and thinly coated with non-heat resistant chrome.
[quote]http://cgi.ebay.com/ebaymotors/94-99-TOYOT...sspagenameZWDVW
[/quote]

Hope this helps and doesn't offend.

[LewFX]

i didnt think the 1st pic was the actual item, i asked them for a real picture of it before i would buy it.

number two looks okay and what others have gotten from a 4-1 header.

number three did seem fishy since retail is 209.99 but buy it now is 275! or best offer.

so i like 1 the best since it has tig and mig welding just needs gaskets.

[hitcachi]

You see pic, number 3. Ya thats what mine looks like exactly. Except, I put heat wrap on the pipe thats next to the alternator to protect the core just cause the f'er puts off so much heat!

[spke719]

[quote name='bindertch' date='Mar 24, 2006 - 11:43 PM' post='412883']
[quote name='LewFX' date='Mar 25, 2006 - 3:18 AM' post='412846']
[quote]Okay im bored, what are anyones thoughts on these headers?[/quote]

Ok this first set looks good but the pic isn't of the actual item because the bottom end is wrong. It sounds good the way they describe the equal lenghths and if it is the entire header and down/flex pipe I would go for it.
[quote]http://cgi.ebay.com/ebaymotors/CHROME-HEAD...sspagenameZWDVW[/quote]

This one looks ok but the stock down/flex pipe is used and the O2 part is photo shopped to show that they can put either fitting depending on what you use. Probably would be easy to install if you don't have that much rust and the cat separates from the lower pipe.
[quote]http://cgi.ebay.com/ebaymotors/CHROME-HEAD...sspagenameZWDVW[/quote]

dude on this on it comes with both of them on it i have this one. i had to get a special bolt for that hole.


Ok this seller sells the cheapest headers for the most rip-off prices. Unfortunately I found out the hard way. I will show you tomorrow at the meet what I mean. These are made out of regular steel pipe and thinly coated with non-heat resistant chrome.
[quote]http://cgi.ebay.com/ebaymotors/94-99-TOYOT...sspagenameZWDVW
[/quote]

Hope this helps and doesn't offend.
[/quote]

[1994toyotaracer]

i actually have the second pic headers it fits great and looks good