Website Banner, Requesting pic Options

[Phoenix]

To the Admin of this site,

Recently i've built an informational website that is based off the 3S-GE Beams Redtop. I would like to put a 6G Celica Website banner on the webpage as ive used bits and pieces of information from your forums, and would like to link the banner to your forum.

I need a banner

Could you guys post one here for me so i can add it to the links page on the website.

oh, and here is the site in case you were wondering.

www.Beams-Redtop.com

[Defgeph]

Nice website. Do you have any translation of the BGB in english ?

[WaynO]

Great idea mate with the site this motor needs one!!

Dont know if anyone has put BEAMS into a 5th gen before but I've done it (almost, damn wiring) so perhaps I could share some knowledge your way once my own new website is up and running!

[Coomer]

What size would you like the banner in? I can get one for you.

Thanks,
Christian Coomer

[Phoenix]

thanks coomer, i think im looking for 400 X 60 pixels.

defgeph - Im working on the BGB for the Beams. Im following a lead for the grey-top engine with the possibility of a manual being produced for that engine english. Then figuring out the differences between the 2 engines ( so far, just ECU tuning because the grey-tops run automatic trannies only).

If i cant get that info, i can go to my local toyota dealer and get the manual in japanese and slowly pay for the translation with the donations i get from the site. Course, im looking at 10 bucks a page. Which i would start with stuff like timing belt and torque specs.

Wayno - I like your site, nice graphics. I on the other hand am horrible at graphics. Are you going to put a Beams section on your site? I know of nothing about the celicas except of course, the 5S-FE and 3S-GTE Engines. I can ask my buddy though who is located down under, he might know, they have more beams down there than most countries (except japan

coomer, do you guys do any cross promotion with other websites? Such as do you advertise banners and stuff?

This post has been edited by Phoenix: May 17, 2006 - 9:22 AM

[WaynO]

Yeah buddy I was just going to have the writeup on my website of what process I went through! My current write-up is on OZ Celica under 5th generation if ya wanna check it out from a 5th gen Celica point of view. Still working out alot about this motor myself but yeah I can send some BEAMS graphics, titles etc your way if you want to spruce your site up a little more!

[Phoenix]

Thanks man! I like to consider this a community site and will gladly accept all information and pics for the beams engine and will definatly integrate them into the site.

*Nevermind, i found a source through the beams site*

This post has been edited by Phoenix: May 19, 2006 - 1:28 AM

[Coomer]

Phoenix, I'll work on the banner tomorrow or possibly this evening. Sorry for the slow reply but I've just been swamped lately.

And no, I don't really do any cross promotion with any other websites. I really should, but it's another thing I don't have a ton of time for.

[Phoenix]

thanks, no hurry Im leaving tonight for a 2 day MR2 Meet in the mountains here in Japan, so i wouldnt be able to get anything done on the site until monday.

you should look into advertising, having a scrolling banner isnt too hard to maintain. Im in good with the Admin Team on the MR2board.com if you need some help.

[jgreening]

Nice tech info on your site. Good job.

[97lestyousay]

Nice site.

This post has been edited by 97lestyousay: May 20, 2006 - 6:06 AM

[Phoenix]

thanks guys for the comments on the site, its a work in progress and if you feel like sharing personal engine specs (if you have a beams), please feel free to do so in the forums so others can learn more about the beams.

Im working with a few people from australia and new zealand who are owners to get more information so if you have any, feel free to let us know.

Its a community site and without the community, the information wont get collected and displayed.

Coomer - Im ready for a banner when you are

[Coomer]

Oops, I knew I forgot something this weekend. I made a couple and have the design .png file saved, so if you'd like any changes just let me know.

But here's blue and red for now.





Thanks,
Christian Coomer

Attached image(s)

 

[Phoenix]

The red will go perfectly for site, thanks!

also, do you allow banners from other websites to be signatures? such as if i put the beams-redtop website banner as my siggy (smaller though), is this allowed?

This post has been edited by Phoenix: May 23, 2006 - 9:07 PM

[Coomer]

The red will go perfectly for site, thanks!

also, do you allow banners from other websites to be signatures? such as if i put the beams-redtop website banner as my siggy (smaller though), is this allowed?

Actually, no...to be fair we couldn't allow that. We haven't allowed others to in the past and we need to be consistent.

A link would be fine though.

[Phoenix]

thanks, i figured

no worries, just wanted to ask before doing it and then getting in trouble

When you get advertising going (if you get it going), let me know. Maybe we can work something out with the Beams Website and maybe a couple others.

[Phoenix]

Coomer

http://www.beams-redtop.com/Links.htm

Thanks again

[Coomer]

Coomer

http://www.beams-redtop.com/Links.htm

Thanks again

That looks awesome! Thanks!

[Phoenix]

hey, i just checked that link, do you see the banner? I dont.....hmmmm