How To Install GT-Four Raiser Blocks on a 94/95 Hatch Options

[jcaron9gt4]

Bringin this thread back.....
quick question for anybody, are these four little screws the only thing securing the spoiler to the blocks?

[azian_advanced]

yes, pretty much. but if you can find better screws (ones with deeper threading and wider diameter), you're better off that way.

[jcaron9gt4]

okay thanks, just wanted to make sure

[thangxixon]

cool write up , someone made it sticky pls.

[tomazws]

Wow,, how could I miss this awesome write up!??!

[Batman722]

cool write up , someone made it sticky pls.

it already is stickied

[jcpowered]

WERE CAN I BUY THE GT FOUR SPOILER

[azian_advanced]

chrisc is selling some...

FS: GT-FOUR Rear Wing Raiser Blocks

[Betta-J]

What about for the 3 post hatchs? how do you cover holes and work with the holes for the current blocks??

Thanks.

[trdproven]

who hath summoned this thread from the grave? It is indeed a good write-up.

[presure2]

What about for the 3 post hatchs? how do you cover holes and work with the holes for the current blocks??

Thanks.

this thread by hurley97 (Steff) will show you how its done

[costa]

thanks helped me alot installing mine!!

[Nial]

Bringin this thread back.....
quick question for anybody, are these four little screws the only thing securing the spoiler to the blocks?

No...to fit it correctly there is a fitting kit from Toyota that includes proper bolts like the ones that hold the spoiler to the boot/trunk lid, it also includes some captive nuts in a bracket that clip into the underside of the spoiler keeping it very secure.....IMO you should be using this kit as little self tapping screws arnt strong enough...there is potentially alot of force going through the spolier, both from wind resistance, and if you use the spoiler to open the boot/trunk.

[SteJay]

Hey Guys

My friend asked me to find out for him wheter or not the GT-Four raiser blocks would fit on a gen 6 Celica GT its a Jap Import. The guy in Toyota here in Ireland told him they wouldnt.

Any help much appreciated

Cheers

[malpaso]

Hey Guys

My friend asked me to find out for him wheter or not the GT-Four raiser blocks would fit on a gen 6 Celica GT its a Jap Import. The guy in Toyota here in Ireland told him they wouldnt.

Any help much appreciated

Cheers

since it's Jap import it's hatchback... and since it's hatchback they must fit... for 100%

[SteJay]

Okay cheers buddy

[Jaws4God]

Bringin this thread back.....
quick question for anybody, are these four little screws the only thing securing the spoiler to the blocks?

No...to fit it correctly there is a fitting kit from Toyota that includes proper bolts like the ones that hold the spoiler to the boot/trunk lid, it also includes some captive nuts in a bracket that clip into the underside of the spoiler keeping it very secure.....IMO you should be using this kit as little self tapping screws arnt strong enough...there is potentially alot of force going through the spolier, both from wind resistance, and if you use the spoiler to open the boot/trunk.

how much is that kit?

[Malek]

I know this thread is old and I'm not much of a big poster on here but I'm really wondering what the answer is to the above question..
How much is it? and what is the exact name for it? (if any) Thanks

[jordisonjr]

I just mounted my blocks, and realized that useing the two screws like this write up says really isn't the best way. where you drill the holes on the spoiler is really soft material, seems to be a harder version of styrafoam. So i mounted them once, then took them off to paint, and the holes i drilled were basically stripped. Definately would not recomend just using the two screws, doesn't seem too safe to me.

[Nial]

http://www.toyodiy.com/parts/p_E_1994_TOYO...VZW_7601.2.html