Installation of injen intake Options

[ZacMan1987]

Ah. Knowing that it was a civic intake would have helped. So yeah.

If you've plugged in your intake temp sensor

and

If you've plugged in your crank case vac tube

and

If you've plugged in the other hose that goes off into neverland.

and you still have extra holes, then yes. You should plug them.

Weld, cork, do whatever, but yes, definitely plug them.

[QuintinGT]

What is the part number for this? i bought an injen intake that i though was this one but it ended up being 6 inches long. if someone could help me out that would be great!


[/quote]

[LewFX]

part number for the intake.....IS2040

B = blue
R = red
P = polished
etc

This post has been edited by LewFX: Jun 20, 2006 - 5:46 PM

[CheesyLobster]

i dont understand... you are asking what the part number for the vacume tube is? if so there is no part number, just go to any car store and buy 6 inches of vac tube for like a dollar.

[LewFX]

oooh if the vac tube they gave is too long then cut it and size it up

[pandakid]

[b]if your talking about this nipple thing i didn't know what it goes to 2. but i just put a breather.












This post has been edited by pandakid: Jun 20, 2006 - 7:18 PM

[QuintinGT]

Sorry i should have been more specific, I was talking about the whole thing not just the vacume tube. LewFX answered my question though, thanks

[6strngs]

my question still hasn't been answered... I'll get some pics tomorrow to give you a better understanding of what I'm talking about.

[6strngs]

ok, as you can see, I've got the tube on the intake now (taped off at the moment until someone can tell me where all these tubes go!) now, I know now where that tube is supposed to go, but as you can see, there is a tube already there that runs to the throttle body. so if I take that end of the tube off to put the tube from the intake there, then where does the other tube go?!?!?!

[LewFX]

[devilsden97]

LOL ^ WOOT FOR MS PAINT!

[LewFX]

photoshop cs2 never ms paint

This post has been edited by LewFX: Jun 21, 2006 - 2:59 PM

[devilsden97]

lol even better lol looks like ms paint

[6strngs]

that's the part I already know! I'm talking about the other tube!




This post has been edited by 6strngs: Jun 21, 2006 - 3:17 PM

[LewFX]

fix the valve hose to the intake nipple and we go from there...your current valve hose goes to the throttle for whatever reason, the intake hose is going where?

This post has been edited by LewFX: Jun 21, 2006 - 3:46 PM

[6strngs]

fix the valve hose to the intake nipple and we go from there...your current valve hose goes to the throttle for whatever reason, the intake hose is going where?

currently; the intake hose is just taped off until I could get a straight answer as to where the valve hose was supposed to go.

[LewFX]

you got an extra hose going on there, take one off and put the other from the valve to the intake. like the picture shows...follow the red line.

[Toyoca]

[b]if your talking about this nipple thing i didn't know what it goes to 2. but i just put a breather.

thats what i should plug up my extra hole with. thanks!

[LewFX]

[6strngs]

right, so, what I need to know is what plugs onto the gold colored nipple circled in red. from your pictures, neither of your cars have this so I'm really confused.

also, the tube connected to the valve (circled in purple) is extremely difficult to take off. it had a little metal fastener thing (circled in pink) that I pushed down the tube a few inches, and then I yanked as hard as I could on the tube and it didn't budge at all...