 Injen Intakes, I have a few ?'s about it |
  |
 Jun 14, 2003 - 3:40 PM
|
 
|
 Enthusiast  Joined May 23, '03 From Illinois Currently Offline Reputation: 0 (0%)  |
How much hp did u gain? What is the pipe diameter? What is the total length of the Injen CAI?
|
|
Jun 14, 2003 - 5:34 PM
|
|
 Enthusiast Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%) |
Considering the fact that the intake opening is 2.5" I'd say that's the diameter. I'm not sure how long it is, but it fits perfectly so you shouldn't need to worry. I don't know how much I gained, probably nto too much. The growl from it is what I like.
-------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
|
Jun 17, 2003 - 3:11 PM
|
|
|
Enthusiast Joined May 23, '03 From Illinois Currently Offline Reputation: 0 (0%) |
anyone else have it?
|
|
Jun 17, 2003 - 8:18 PM
|
|
 Enthusiast Joined Apr 20, '03 From Chicago Currently Offline Reputation: 0 (0%) |
Yea, I'd say maybe 2 or 3 to the wheels, maybe 5 corrected. But I love the sound it makes, and I love the bling factor of opening up the hood and seeing it. So maybe you'd say your car had 140 instead of 135. Anyway, it's a great mod, easy to do, a good place to jump in, and a definite must if your going to go further.
|
|
Jun 17, 2003 - 9:01 PM
|
|
 Enthusiast Joined Oct 12, '02 From Cincinnati, OH Currently Offline Reputation: 0 (0%) |
how much do these usually go for? 140ish? right now all i have is just a cone filter instead of the damn restrictive airbox.
-Brian |
|
Jun 17, 2003 - 9:42 PM
|
|
 Enthusiast Joined Dec 21, '02 From Orlando Currently Offline Reputation: 0 (0%) |
Um...try a little over $200, you can find it cheaper elsewhere, but that's the MSRP anyway. It's a great, high quality intake though. Fits the GT and ST and the new ones even have the CARB number on it. There's a pic of it on my 6GC page if you'd like to see it.
|
|
Jun 17, 2003 - 11:53 PM
|
|
|
Enthusiast Joined Apr 20, '03 From Chicago Currently Offline Reputation: 0 (0%) |
www.racerwheel.com Cheepest prices I've seen, and shipping was quick and nice.
|
|
Jun 18, 2003 - 1:33 PM
|
|
||
|
Enthusiast Joined May 23, '03 From Illinois Currently Offline Reputation: 0 (0%) |
Can you even feel the hp? Is it loud? |
||
|
Jun 18, 2003 - 9:17 PM
|
|
|
Enthusiast Joined Apr 29, '03 From Davenport, IA Currently Offline Reputation: 0 (0%) |
Mine just makes a kind hissing sound and then a sucktion sound with it grabbin air. I dun think you can really feel it, although, I did my Greddy Exhaust and intake at the same time....so I did notice a difference cuz I had both.
|
|
Jun 18, 2003 - 10:31 PM
|
|
|
Enthusiast Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%) |
Reset the ECU and you feel a slight difference in higher RPMs. I got mine for 180 at a local race shop. Look at Injen's dealer page and you might find one close to you which would cut out shipping.
-------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
|
Jun 19, 2003 - 2:12 PM
|
|
 Enthusiast Joined Nov 15, '02 From california Currently Offline Reputation: 0 (0%) |
When the stock box and filter are out and replaced with the injen, what happens to all those wires and tubes that seemed to be supported by the stock box?
|
|
Jun 19, 2003 - 2:15 PM
|
|
|
Enthusiast Joined Nov 15, '02 From california Currently Offline Reputation: 0 (0%) |
Oh and doesn't the filter get a lot dirtier quicker cause there's a lot of dust on the exterior of my stock filter box right now. I know the filter can be cleaned. Can I just hose it or do I need special cleaning stuff?
|
|
Jun 19, 2003 - 11:41 PM
|
|
|
Enthusiast Joined Apr 20, '03 From Chicago Currently Offline Reputation: 0 (0%) |
You need special cleaning stuff, you also need to spray it with filter oil before you install it. I got my filter spray oil, plus cleaning stuff together for like $15. Clean it whenever you like, notice a film on it. You can feel the HP but keep in mind it is very small. And you can hear the sound definitly.
Some of those wires like the 02 sensor, go back into the injen intake. You'll see where they go, the instructions are good. Everything just toss, or keep incase you want to go back to stock sometime. |
|
Jun 20, 2003 - 8:20 AM
|
|
 Enthusiast Joined Aug 31, '02 Currently Offline Reputation: 0 (0%) |
I have one, I noticed almost absolutely nothing in terms of speed. Glad I only paid 70 bucks (got it used).
|
|
Jun 22, 2003 - 2:19 AM
|
|
|
Enthusiast Joined Apr 20, '03 From Chicago Currently Offline Reputation: 0 (0%) |
Well yea, but then again no intake is going to get you HUGE gains. $100 for a few horse is a pretty good deal.
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 8:29 AM |