CT26 & Exhaust Manifold Bolts, What are the specs? Options

[WALKER]

I was hoping that you guys could give me some information on the specs for all the bolts on the CT26 and Exhuast Manifold.

Bolt sizes and lengths for the exhaust manifold, for the 4 bolts on the entry side, and 6 bolts on exhaust side.

Also, when you guys get your parts ceramic coated, do you send them away with the bolts?

Thanks.

[WALKER]

Does nobody have information on any of the bolts?

[alltracman78]

They're studs, not bolts.
And I take it you mean exhaust housing, not exhaust manifold?
Regardless, all the studs have the same thread.
10 x 1.25 mm.
I don't remember lengths.

Send the parts with them. They should be covered when the parts are coated, just like the gasket surfaces.
Otherwise you will have a hard time putting the nuts back on.

[WALKER]

Thanks for you help.

I guess they are studs, I wasn't really thinking! As for lengths I can measure the ones I do have myself.