window crank Options

[dan85204]

this was the topic of one of my previous posts, and thanks to the people who tried to help me out then, but i still don't know how to get the manual window crank off so i can take my door panels off. i know there's a C-clip type of thing i need to remove, but don't know where it is or how to remove it.

what i'm really looking for are some pictures of the inside of the door so i can get a better idea of how to do this.

i have the locks that you push one door's lock down and they both go down. they were screwing up, and i was told to spray WD40 in the actuators, but i don't know how to get the plugs out, probably because i can't get my door panel off all the way.

if anybody could provide me with some pictures of this actuator thing and the inside of the door that would be great.

[Vissi]

hmm, on my old car i was told that you just use a like thin towel and kinda wedge a corner in there, and then you use it kinda like a saw. Suprisingly it worked for me , but this was on my old 94 sunbird(POS).

[forkee]

use a flathead screwdriver to pry it away a bit, then pliers to pull the closed end of the "C" straight away from the middle of rotation


looks something like this (arrow indicates direction the clip has to go)
<----C==O