GB: 5sfe headers...PICS and VIDS ON PAGE 3, UPDATE ON LAST PAGE...you guys wanna start this up again? Options

[pimped6gen]

UPDATE ON THE LAST PAGE....

Hey guys I got it in! My car IS 100% completed. The header is a 4-1 design. The header is colored black and only requires modification to the length of the 02 sensors. Everything else bolts right up.

The pricing will be as follows--
1-9 people -215 shipped. Colored with black paint, and all gaskets
10-20 people -205 shipped. Colored with black paint, and all gaskets
I can do the whole system back to the cat, but just pm me if your intersted.

I got the header in, car runs great and pulls strong.

PICS and VIDS on page 3.

Send the money to jcamp13@comcast.net through paypal.
I would appreciate 3% added onto the final price, b/c once again, Im not making any money on this!
Thanks!

We'll end the name taking on Saturday July 15th
4-1 Header, All gaskets included
Only thing you'll need are 3 bolts,a spacer if needed, and wires to make your o2 sensors longer.
Any exhaust shop will be able to do this and should have the wire, and accesories on hand!

UPDATE ON THE LAST PAGE....

This post has been edited by pimped6gen: Sep 7, 2006 - 9:57 AM

[My2Celi]

shoo im in.

[j0e_p3t]

wish i had a gt.

[romeovaj]

will the cost go down if we get more people?

[pimped6gen]

will the cost go down if we get more people?

yes, the cost is aproximate it will most likely go down depending on how many people we get.

1.)pimped6gen
2.)My2Celi

This post has been edited by pimped6gen: Jun 22, 2006 - 11:04 AM

[Bigmeanbulldog55]

I'm in, but I want to see a picture of this thing, and I would like to know how "bolt on" it will be. Also, are you making money on this deal, or is this just a service you are offering just to help out?

[JFrost9]

I'm in, but I want to see a picture of this thing, and I would like to know how "bolt on" it will be. Also, are you making money on this deal, or is this just a service you are offering just to help out?

x2. Count me "in" im not sure if ill i have a GT, but if i do, then ill be down.

if this is "This is going to be done. This is not a waste of time like most of the other header gb's. This is for real, my header is almost complete." like you said, why is it a feeler? =( lol.


This post has been edited by JFrost9: Jun 22, 2006 - 12:56 PM

[pimped6gen]

I'm in, but I want to see a picture of this thing, and I would like to know how "bolt on" it will be. Also, are you making money on this deal, or is this just a service you are offering just to help out?

Pics will be up friday june 30th. IT WILL BE BOLT ON..PROMISE. This is a service for you. The header for me will cost about 210 once completed. I am adding about 20 dollars for shipping. He said if I get 10-15 people he will work out a little bit of a price reduction with me.

x2. Count me "in" im not sure if ill i have a GT, but if i do, then ill be down.

if this is "This is going to be done. This is not a waste of time like most of the other header gb's. This is for real, my header is almost complete." like you said, why is it a feeler? =( lol.

I wanted to make it a feeler to see how many of you want this header. I will change the topic name for you to GB:

1.)pimped6gen
2.)My2Celi
3.)Bigmeanbulldog55 (pending on pic)
4.)JFrost9 (pending on gt)

This post has been edited by pimped6gen: Jun 22, 2006 - 5:05 PM

[Batman722]

I have a few questions...

will this header only replace the exhaust manifold and the primary cat ? and will bolt directly to our stock flex/down pipe ? and have a bung/flange for the front 02 sensor ? will a manifold gasket be included ? or an 02 sensor gasket ?

thanks

[pimped6gen]

I have a few questions...

will this header only replace the exhaust manifold and the primary cat ? and will bolt directly to our stock flex/down pipe ? and have a bung/flange for the front 02 sensor ? will a manifold gasket be included ? or an 02 sensor gasket ?

thanks

yes it will replace the primary cat and will directly fit on your stock downpipe. Yes, this does include all flanges and bungs, as of right now i am unsure if it comes with either of the gaskets but ill check tommorow and get back to you.

[Batman722]

I have a few questions...

will this header only replace the exhaust manifold and the primary cat ? and will bolt directly to our stock flex/down pipe ? and have a bung/flange for the front 02 sensor ? will a manifold gasket be included ? or an 02 sensor gasket ?

thanks

yes it will replace the primary cat and will directly fit on your stock downpipe. Yes, this does include all flanges and bungs, as of right now i am unsure if it comes with either of the gaskets but ill check tommorow and get back to you.

good answers

I am in 70%, gotta decide a little more

[LewFX]

how much is a dp gasket?

[Batman722]

how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer

[pimped6gen]

how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer

I do not believe that is needed is it? I believe its just suggested, is it not?

[cg97]

im liking the sounds of this, gotta check the funds and ill get back to ya.

[Batman722]

how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer

I do not believe that is needed is it? I believe its just suggested, is it not?

it depends on the condition of your old gaskets. I would get new ones because mine are over 10 years old and baked, but it is up to you.

the other thing I have a problem with is 94 fed (non cali) GTs only have 1 02 sensor, all of the rest have 2. The front 02 sensor has the same fitting each year (flange) while 96+ has a bung fitting for it's rear 02 sensor.

It is shown in this pic (thanks Lew)



the top (front) is a flange while the bottom (rear) is a bung. I have 2 flanges for my 02s (94-95), other members have 1 of each (96+). There is no header that will accomidate 94-99 GTs easily.

[creis]

if there only $230 I'll give it a try, kinda pissing me off that I can just swap the motor but thats a diff story.

anyway, I'm in.

[chucho]

how much is a dp gasket?

dp gasket is part # 90917-06066, about $7 - $8 from a dealer

also the ex manifold gasket is part # 17173-74040, about $20 - $25 from a dealer

also, 02 sensor gasket is part # 89466-20020, about $5 from the dealer

I do not believe that is needed is it? I believe its just suggested, is it not?

Once you release the pressure by removing the old manifold the used gaskets are going to expand. So your gonna need new gaskets. Not like its that expensive. If you use the old one your chancing a leak which is not a good thing.

[LewFX]

do you need a dp gasket, because i currently do not have one.

my header is a 4-1 not a 4-2-1

This post has been edited by LewFX: Jun 23, 2006 - 12:14 AM

[LewFX]

use
https://www.1sttoyotaparts.com/part_number.html
for gaskets, they cheaper than dealer.
plug in part#
$5 for dp gasket
$19 for manifold gasket
free shipping!

This post has been edited by LewFX: Jun 23, 2006 - 12:30 AM