3sgte wiring Options

[Punisher]

Looking for someone here who has put a 2nd gen 3sgte (W/ 2nd gen harness) into their 6gc GT.

I need help with the wiring.. not literal help (I'm not a wiring n00b).. but someone who has done the wiring themselves successfully and can point out all of the stuff I need to wire in and what not.

I could do this myself however it will take longer than if I have someone that can just tell me exactly what it is I need to do. Only looking for someone who has done this and really knows what is up.

If someone here can help me out I would be willing to send you a few dollars through paypal. This will definitly help me get the swap done faster.

I have all of the wiring diagrams and ecu pin outs for both the 94 gt and the 91 alltrac which I got everything from. Not a wiring n00b either but the less time I have to spend figuring out wiring the better.

My AIM SN is either punisher3sgte or fumbduck0

If yo u don't have AIM but another service, send me a PM.

This post has been edited by Punisher: Aug 19, 2006 - 10:47 PM

[celica47]

Hey bro, theres two guys on here that will do the wiring for you. DG_peformance and iam not sure if DR. TWEAK still can but PM them and they can help you out.

[Punisher]

I don't need someone to DO the wiring.. I can do it up myself as I explained. I just need someone knowledgeable in it to talk to me about it and let me know what needs to get changed. I'll pay them for their services.

If I know exactly what systems I need to wire up I can do the wiring in a day.

[celica47]

ok well still talk to one of those two guys they will be able to help you out.

[brianforster]

i dont think anybody is "new" to wiring, its just strip solder heatshrink..

were just saying that people like DG and tweak make a living off of this stuff, so id say its a little unfair to them as businessmen and everyone else for paying them.

its like when people pay to have there car dyno tuned and people ask for the fuel maps as a base.. its like shhyea.. right..

edit: im not tryin to be rude or anything here, and also i think that the wiring issue has been covered before in searches.

This post has been edited by brianforster: Aug 19, 2006 - 11:13 PM

[phattyduck]

Get the diagrams and start connecting the dots (errr... wires). When you get to the point where you have just a few odd wires you can't figure out, there will be a few guys that can answer your questions.

You are asking a lot for somebody to put together a whole writeup or something just for you, so don't be dissapointed if you don't get all the answers to your very general question.

-Charlie

[Punisher]

I am just looking for someone who can tell me what systems need to be re-wired.. that's about it.. But if no one is interested in making a few bucks for no more than 30 minutes of typing or talking on the phone.. then I'll just work it out myself.

[brianforster]

my apologies punisher, i must have missed the part where you offered to pay.. in that case im sure tweak or DG would help you.

[Punisher]

I don't care who it is.. I'm willing to pay out a couple bucks.. like 20-30 tops.. Cuz I don't need any work done I just want someone to share the info with me .. like exactly what systems I just need to wire over and ****.. that's all. I just printed out a ton of the 6gc wiring diagrams and 5gc diagrams.. so I am good to go with that.. I guess I will end up figuring this out myself. If anyone wants to help my contact info is in my first post.

[Punisher]

I started to work on the harness tonight. I've done a lot of toyota wiring including a 93 engine harness and ecu into an 89 corolla sr5 (carbureted) and a 4th gen JDM 4agze into an 85 corolla sr5.

So I have my hands all over toyota.

Anyway things are coming a long a lot easier/smoother than I would've imagined to begin with.

[DG_Performance]

I was going to post a "6gc to 3s wire swap how to" a while back but i figured i would be putting myself outa alot of business if i did that. And then i thought that if i was able to make a few bucks and help all you guys that i could post it. So I asked if i was allowed to take donations from posting this info on this site and I never got a reply so i figured i was not allowed to do that. So ??? I guess people just have to send their harnesses out to get done.
DG

[presure2]

dave, your more than welcome to do that, i'd totally support that..
hell, i'd even make a donation.