how do I wire up HID, No manual *DONE* thank you! Options

[Daftboy]

Hey just got my HID's (actually just about 5 seconds ago) what is the best way to set these up?

This post has been edited by Daftboy: Sep 14, 2006 - 1:45 PM

[Chanh55]

Start by reading the Installation Manual.

This post has been edited by Chanh55: Sep 14, 2006 - 12:04 PM

[Akira_g4]

yea man just like chanh said, read the manual. it's super easy, just "plug and play". Pluging it all up takes about 5 minutes then mounting it might take 10-15. simple fun lil mod. but hey if you neeed some pics just ask.

[Daftboy]

There is no manual ...they were used...

[Akira_g4]

pretty much self explanatory. sorry i did this pretty fast i got work in about 15 min. good luck man!

take out the stock bulb, im just guessing you know how to do that.

BE SURE TOO MATCH UP THE CORRECT WIRES! RED IS POSITIVE AND BLACK NEGATIVE!




itll be a tight fit but some pressure into it, itll fit.


now just mount the ballast in some way so they don't move around and bam youre done.
http://www.6gc.net/forums/index.php?showtopic=39875&hl= about mounting.

This post has been edited by Akira_g4: Sep 14, 2006 - 12:39 PM

[Daftboy]

Yea that is what i did....just wantted to make sure I was not missing anything thats all

[Chanh55]

Nice write up!

Oh yeah... I taped up where the wires are hooked up to the stock connectors with electrical tape... to keep water out or to keep it from accidently getting pulled out.

[DeW_H0e_GT]

now lets see some pics..

[3WayStunna]

just a quik question about the celica's light since yall are on the topic, but what type bulbs does the celica use...( stock)

[95CelicaST]

just a quik question about the celica's light since yall are on the topic, but what type bulbs does the celica use...( stock)

I believe its 9005's and 9006's for lights. I think 9006 for lows and 9005 for high, but don't quote me.

[3WayStunna]

hmm wow thats interesting..i got a question...if a car comes stock with H4's does it need the HID conversion?