QUIET HATCH!!!, Make it Stop!! Options

[vozizm]

This ****ing hatch is noisey!!

Thinking about dynamat in the rear..

What have some of you kats done?

Is there was an alternative to Dynamat paper?

[hitcachi]

Try this. Worked for me.
http://www.6gc.net/forums/index.php?showto...66&hl=hatch

[Kadett]

I just turn up the sound a bit more so that I dont hear all the stuff in the back resonating

[LewFX]

glue'd my license plate to the back of the plastic, no license rattle

[vozizm]

it is not music noise... but road noise... just too freaking noisey!!


Cant turn up the sound since everything is stock {for now}

[Kadett]

Road noise, Someone here in Holland used dynamat over the inside of the wheel wells.

[vozizm]

Try this. Worked for me.
http://www.6gc.net/forums/index.php?showto...66&hl=hatch

That is a pretty neat trick!

and i will do that, but not the noise i am hearing

This post has been edited by vozizm: Sep 19, 2006 - 3:15 PM

[My2Celi]

I dynomatted my whole rear and it didnt make no differnce to the road noise.
http://www.6gc.net/forums/index.php?showto...&hl=dynomat

Putting washers behind the rubber fixed it for me.

This post has been edited by My2Celi: Sep 19, 2006 - 3:37 PM

[tim86]

I just turn up the sound a bit more so that I dont hear all the stuff in the back resonating

sounds like my method

[vozizm]

i need some junk in da trunk b4 i can use that method

[vozizm]

i need some junk in da trunk b4 i can use that method

[bufferdan]

If your getting too much road noise you must have some "feathered" rear tires...alignment is probably out wearing the tires uneven. Anyways dynomating the rear should help alot Or you could get some different tires and get your alignment in spec.

[vozizm]

Alignment is within specs, but they have cheap walmart tires on stock rims.. but they are fairly new, so i will wait till they wearout!!


but still trying to find some cheap dynamat TYPE paper