injectors 7afte, will these work? Options

[dans_st]

will these injectors work on my 94 ST 7afte? i know that i need high inpedance, these come with the clips so i figured i could just splice them.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...sspagename=WDVW

[lagos]

thats a little too much fuel ... 440s is the most u would ever want

[playr158]

i'm goin to get a set of
RC440 injectors universal....

for my 7afte project and thats goin to run upwards of 12psi or even more then 15psi

[nik]

there are 4age injector that are high impedence that should work and there 2+ times bigger than the stock 7afe ones there 290cc good enough for 200whp max

[dans_st]

I know that these are more fuel than I would need right now but I am also planning on doing stand-alone FMU and in a few months doiing a 4AG big port head with GZE pistons, and I wanted to have enough fuel so that later I could use even with my future mods and won't have to dish out more cash on another set, sorry I didn't include all the details before.
what i don't really know is if the injector in the auction are high or low inpedance? And would these be a problem even after I do my other mods?

[nik]

I know that these are more fuel than I would need right now but I am also planning on doing stand-alone FMU and in a few months doiing a 4AG big port head with GZE pistons, and I wanted to have enough fuel so that later I could use even with my future mods and won't have to dish out more cash on another set, sorry I didn't include all the details before.
what i don't really know is if the injector in the auction are high or low inpedance? And would these be a problem even after I do my other mods?
[right][snapback]311153[/snapback][/right]

i would ask the seller

the 7afe runs high imped

nice to see more people wanting to go the 7agte route

[dans_st]

Thanks for your help guys, i just bought some RC engineering high impedence 550cc injectors for an integra type-R they should work fine I just need to find the clips to wire them in.

[nik]

Thanks for your help guys, i just bought some RC engineering high impedence 550cc injectors for an integra type-R they should work fine I just need to find the clips to wire them in.
[right][snapback]311263[/snapback][/right]

how much? i hope those fit

[playr158]

wow you have tons of balls 550?

i mean crap i'll be running the most PSI on a 6gc 7afte that i know of and i'm only planning on 440s

[nik]

wow you have tons of balls 550?

i mean crap i'll be running the most PSI on a 6gc 7afte that i know of and i'm only planning on 440s
[right][snapback]311303[/snapback][/right]

what psi is that?

[OOBE]

Yeah, what psi is that?

Most I ran on my stock injectors was 12 PSI and even though the EGTs climbed to the max on the gauge, engine survived, haha.

[playr158]

15psi or more

we'll see when i get the turbo on my motor

This post has been edited by playr158: Jul 12, 2005 - 1:57 PM

[OOBE]

What are you stuffing the engine with?

[playr158]

all sorts of forged goodies

[OOBE]

Hell yeah!

[nik]

all sorts of forged goodies
[right][snapback]311651[/snapback][/right]

like what puater rods, forged pistons, and .......

thats about all unless your going custom crank

what about the tranny.... guessing stock

i'm all about the details its not good enough for me when someone say something so vag(sp)

[playr158]

not really i workin on tranny options right now.....was thinking about a 4age tranny but not sure about it yet
and there is nothing wrong with the 7afe crank nik it should be able to hold up

This post has been edited by playr158: Jul 12, 2005 - 9:48 PM

[nik]

not really i workin on tranny options right now.....was thinking about a 4age tranny but not sure about it yet
and there is nothing wrong with the 7afe crank nik it should be able to hold up
[right][snapback]311759[/snapback][/right]

wow really ....... i know that **** aready but have you seen anyone push the crank pass 300whp and 8500 rpm

how do you even know the crank can hold up. Quit your bs you dont even know yoru just guessing


This post has been edited by nik: Jul 13, 2005 - 10:42 AM

[playr158]

wow since a 7afe can really do that NIK

....... i know that **** aready but have you seen anyone push the crank pass 300whp and 8500 rpm

way to go!

[nik]

wow since a 7afe can really do that NIK

....... i know that **** aready but have you seen anyone push the crank pass 300whp and 8500 rpm

way to go!
[right][snapback]311939[/snapback][/right]

dude you me some times