Sanding and sanding, pics pg 5 |
Sanding and sanding, pics pg 5 |
Nov 10, 2006 - 2:49 AM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
Finally got the keys to the warehouse where I will be working on my car. I grabbed up the parts I've gained so far and took them out there, figured I'd snap a few pics while I was at it. This place is a lot bigger than I was expecting, I guess I've just never seen 4500 sq ft of plain open space before.
This is where I'll be working on it at, I wasn't parking it there to start tearing it apart just yet, I just wanted to get some measurements so I can setup a proper paint booth when the time comes. Just another shot. I'm getting excited, I can't wait to have her looking like the nubian goddess she should be . This post has been edited by JonMarkos: Jan 18, 2007 - 7:53 AM -------------------- We shall show mercy, but we shall not ask for it. |
Nov 10, 2006 - 7:07 AM |
|
Enthusiast Joined Jan 10, '06 From Mozambique, Africa Currently Offline Reputation: 8 (100%) |
Sweet! good luck! are you just painting the parts to match your car, or are you painting it all a different color?
-------------------- "Remember, amateurs built the ark and professionals built the Titanic. But revolutionaries built the Celica!"- Me |
Nov 10, 2006 - 8:00 AM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
I'm painting it the same color, but I'm doing more than just painting the parts. A few weeks ago my car was parked outside and got hail damage all over it, plus the paint is just crappy after 9 years of use. My plan is to strip it all down, mold on the sideskirts and rear extensions (as soon as I find them) fix all the body damage and repaint the whole car.
-------------------- We shall show mercy, but we shall not ask for it. |
Nov 10, 2006 - 9:52 AM |
|
Enthusiast Joined Jul 20, '06 From St. Thomas, Virgin Islands Currently Offline Reputation: 0 (0%) |
Sounds awesome. Looks like you've got lots of space to work with . Good luck and can't wait to see results!
-------------------- "I bet you drive a standard." "You could make some money off that bet." :D |
Nov 10, 2006 - 9:55 AM |
|
Enthusiast Joined Sep 13, '06 From Tampa/Deltona, FL Currently Offline Reputation: 0 (0%) |
Sounds like someone is going to be having some fun
|
Nov 10, 2006 - 12:12 PM |
|
Enthusiast Joined Oct 5, '05 From NE Currently Offline Reputation: 6 (100%) |
Hey man if you need any help i'd be out there in a heart beat. So let me know. I'm sure there is some things that i could help you with
-------------------- |
Nov 10, 2006 - 12:12 PM |
|
Enthusiast Joined Oct 5, '05 From NE Currently Offline Reputation: 6 (100%) |
.
This post has been edited by celiracer: Nov 10, 2006 - 12:16 PM -------------------- |
Nov 10, 2006 - 11:38 PM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
Hell yeah, I'll let you know, I'm bringing in a nice air compressor and a nice DA sander but I'll still have to do a bunch by hand, and four hands will certainly work faster than two
-------------------- We shall show mercy, but we shall not ask for it. |
Nov 11, 2006 - 4:24 AM |
|
Enthusiast Joined Oct 5, '05 From NE Currently Offline Reputation: 6 (100%) |
QUOTE(JonMarkos @ Nov 10, 2006 - 11:38 PM) [snapback]501502[/snapback] Hell yeah, I'll let you know, I'm bringing in a nice air compressor and a nice DA sander but I'll still have to do a bunch by hand, and four hands will certainly work faster than two Yeah man let me know. I'll help you out. It'll get done faster that way we can get a mini shoot of our celi's. Mine's painted finally -------------------- |
Nov 11, 2006 - 10:40 PM |
|
Enthusiast Joined Nov 1, '04 Currently Offline Reputation: 1 (100%) |
so what are you doing to it?
I see some body parts... what are they? -------------------- 2003 Nissan Murano SE |
Nov 12, 2006 - 1:33 PM |
|
Enthusiast Joined Oct 5, '05 From NE Currently Offline Reputation: 6 (100%) |
404 sides ss-III front spliters and i think he's finding rear splitters
-------------------- |
Nov 13, 2006 - 4:07 PM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
^^ yup, Hiro rear extensions to be exact. I found them, just have to wait for production and shipping WOOT WOOT
-------------------- We shall show mercy, but we shall not ask for it. |
Nov 13, 2006 - 6:42 PM |
|
Enthusiast Joined Oct 5, '05 From NE Currently Offline Reputation: 6 (100%) |
Sweet. So when are you planning on doing this stuff jon? let me know when you need help. i'll be glad to go up there and help you.
-------------------- |
Nov 14, 2006 - 11:15 PM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
Well the rear extensions are supposed to be shipped out on November 25th and then they will take a week to make it here. So right around that time I'm going to start the tear down, I'll let ya know when it gets to the grind, plus I'll keep an updated thread of my mistakes in progress
This post has been edited by JonMarkos: Nov 14, 2006 - 11:42 PM -------------------- We shall show mercy, but we shall not ask for it. |
Nov 24, 2006 - 2:14 PM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
WOOT WOOT, more parts came in the mail today. Although it wasn't the extensions, yet, I am just as excited about these
Currens BABY -------------------- We shall show mercy, but we shall not ask for it. |
Nov 27, 2006 - 11:21 PM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
More and more keep comin, woo hoo.
Cusco Adjustable Camber Plates (thanks Jaws4God) -------------------- We shall show mercy, but we shall not ask for it. |
Nov 28, 2006 - 1:47 AM |
|
Enthusiast Joined Oct 5, '06 From dallas tx. Currently Offline Reputation: 2 (100%) |
QUOTE(JonMarkos @ Nov 24, 2006 - 2:14 PM) [snapback]505014[/snapback] WOOT WOOT, more parts came in the mail today. Although it wasn't the extensions, yet, I am just as excited about these Currens BABY dude the currens look sweet i want to get some my self but dude you might want to take some of them special night time things in the back of the pic on the bed out of the pic before taking them lol ..... i couldnt help but notice that there must have been a cop in your room or something i mean i have heard of falling in love with a car but taking it to the bed room lol further then i would have gone anyway back to subject looks like your car is coming together great cant wait to see the out come |
Nov 28, 2006 - 1:59 AM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
^^yeeeeeeaaaaaah....I noticed that when I was uploading the pic to imageshack but I figured oh well, those don't leave my bedside, except when my mom came to visit because she is kind of....conservative
-------------------- We shall show mercy, but we shall not ask for it. |
Nov 28, 2006 - 2:14 AM |
|
Enthusiast Joined Oct 5, '06 From dallas tx. Currently Offline Reputation: 2 (100%) |
QUOTE(JonMarkos @ Nov 28, 2006 - 1:59 AM) [snapback]505798[/snapback] ^^yeeeeeeaaaaaah....I noticed that when I was uploading the pic to imageshack but I figured oh well, those don't leave my bedside, except when my mom came to visit because she is kind of....conservative whats gonna suck is when she come out of no where and you lost the key the night before lol theres no way out of that one ..... mom: son whats that on your bed ? you : hummmmm..... mom : are those ? you: a new decorating look that came with the bed ..lol sorry that was just going around in my head anyway where did you get the curren lights from i really like the hatch jdm look but seeing as how i have a coupe curren looks like the way to go or the only way ha... |
Nov 28, 2006 - 2:22 AM |
|
Enthusiast Joined Jun 13, '06 From Omaha, Nebraska Currently Offline Reputation: 11 (100%) |
Eh, my mom knows I can be a deviant at times, I just prefer not to throw it in her face. I got them from Vincent_doggy, a member on here, they were the last set he had for sale but he is always getting new jdm parts in and might even be able to get them for you if you ask. His prices are awesome too, I bought these as soon as he quoted me, no haggling needed.
-------------------- We shall show mercy, but we shall not ask for it. |
Lo-Fi Version | Time is now: November 23rd, 2024 - 8:51 PM |