Alan's NEW PROJECT, 600+ BHP, 2007-2008 (with pics) Options

[Alan]

you want to speak to TUFY mate, I think his is about 600bhp.

I speak to ismet a lot he is a good friend of mine, but he is running a GT35, the T51 spl is like a GT42 size wise, its a beast .

the turbo i have is good for 600bhp like 500whp so I can tell ya that its fine on the street. extremely fun. you'll just be down shifting often when you want spool up and take off. i dont have 500 whp lol but its very streetable with cams and larger turbo.

How much boost are you running? and when does it start in the rev range?

[x_itchy_b_x]

well it's a holset hx35. its right around gt30 area. full boost of 1 bar at before 4500rpm.
its slow to spool at first, but once it makes it to 5psi it shoots up to 14.5psi alot quicker.
and with cams it just keeps making power all the way to 8200rpm (thats my rev limit anyway, it safer to go higher but meh)

[Alan]

well it's a holset hx35. its right around gt30 area. full boost of 1 bar at before 4500rpm.
its slow to spool at first, but once it makes it to 5psi it shoots up to 14.5psi alot quicker.
and with cams it just keeps making power all the way to 8200rpm (thats my rev limit anyway, it safer to go higher but meh)

I WAS GOING FOR 9000RPM DO YOU THINK ITS A BAD IDEA, WHAT BEARINGS ARE YOU USEING, ARE THE RACE SPEC?
I THINK THE T51R WOULD BOOST AT AROUND 6000 BECAUSE OF ITS SIZE :S I NEED IT TO REV MORE !!!
WHAT DO YOU THINK?

[x_itchy_b_x]

for 9000rpm race bearings would be a good idea. also shimless buckets to lighten up the valve train would be a very good idea. also a higher volume oil pump. having the rotating assembly balanced would be good too. thats a pretty high rpm. ive seen plenty mr2 3sgtes run 8500 with just valve springs but 9000 is getting close to crazy

I'm on a stock bottom end (for now) and head. Just cams and valve springs.
Cant wait to see your build up.

[Alan]

for 9000rpm race bearings would be a good idea. also shimless buckets to lighten up the valve train would be a very good idea. also a higher volume oil pump. having the rotating assembly balanced would be good too. thats a pretty high rpm. ive seen plenty mr2 3sgtes run 8500 with just valve springs but 9000 is getting close to crazy

I'm on a stock bottom end (for now) and head. Just cams and valve springs.
Cant wait to see your build up.

Yes i will be ding all that but never heared of an aftermarket Oil pump where can I get it?

[x_itchy_b_x]

you can get a Toga from here
http://www.importperformanceparts.net/impo...umpstoyota.html
or shim your stocker, theres a thread on the forum about it somewhere.
toga sounds like the best bet.

[Alan]

Naaa, I prefer to buy it new, when it comes down to my celica or somthing that important, thanks for the link man, I never thought there where any THANKS !!!

[Alan]

Ok Guys tomorrow my order will be confirmed what do you think of these I need some feedback, mostly on the T51R any comments?

HKS T51 SPL Turbo
HKS GT 11 wastegate
HKS 272 cams
HKS fuel rail upgrade
HKS Timing belt
HKS 1000cc Top feed
SARD int-ank fuel Pump (280l/h)
Blitz i-color boost controller

[x_itchy_b_x]

i wish i could comment on the t51 but i'm not familiar with it one bit.
everything else looks great for your goals.

[Alan]

DO YOU THINK IT IS TOO BIG? I KNOW THE GT35R WILL GIVE ME 600bhp BUT IF I WOULD WANT TO INCREASE IN THE FUTURE, I AM LIMITED!

[celicast3sgte]

GEZZZZUUUUSSSSSS! a GT42 ona 2.0l 4cyl eh?? i hope you goal is well above 600 to be going with a turbo that big.

[Alan]

TO Say the truth I am still thinking about which turbo I need to get but not alot of people are giving me ideas of the turbo. I think I will be going the GT35 like Tufy, as he is the peoson who is helpign me out, and dont want to buy a too big Turbo and I will have no power at low RPM.

If anyone could give me more ideas It will be much better

[neoklis]

Am I mistaken or your engine is really the WRC version?

[Alan]

Am I mistaken or your engine is really the WRC version?

Dont know how can you tell? hehe

[Alan]

Ok i have confirmed my order and I dicided NOT!! to go for the T51R I was scared it will not do good for my setup, so I decide to go for the GT35R, I also ordered a tail 44mm wastegate 1000cc RC injectors HKS rail Sard fuel pump, and a new exhaust manifold. ohh and also a blitz boost controller and a few other things...
Hopefully It will be shipped Next week Ill post pics when they all arrive

[3WayStunna]

Nice readings on what your trying to do, and hey good luck with your setup alan!!!

[x_itchy_b_x]

How are things going on the build up?

[Alan]

I am currently waiting for the parts it takes ages this shipping :@ but yesterday I took out the head and stripped it to the bare head, in the weekend Ill givve it a small clean so that when the valves I ordered Arrive I could toke it for machining, ohh btw I also ordered Ferrea valves 1mm over size and titanium valves and retainers

[heatherx87x]

go with a gt 3076r .82 a/r sweet spool and nice power

[celicast3sgte]

^^^^ hahaha dude you needa read the post. he said hes ordered his **** already