Can I drive with no hood, Approx 60 miles? Options

[Negative]

Ok this some ricer $hit I know but I have no choice. I need to pic up my GT4 hood from Ngofcukingway butit's approx. 60miles away through the city of Houston and I have no truck. Just the Celica. If you've seen my Audio/Video thread you know I have no room in the hatch for anything.
In order to pick up my hood I have but one option - Take off my stock hood and drive to his place and instal the GT4 hood and then drive back in style.
Anybody know of any reason why this would not be ok? Minus the obvious freak rainstorm, bird dodo in the wrong place or something flying off another car and landing in my engine bay.

[mneal2_92788]

is that legal there? we cant do that up here in indiana. other than the reasons stated i dont see why not if it is legal

[x_itchy_b_x]

just do it lol. before i had my fenders, front bumper, and hood on i drove around for a bit naked. it was loud and looked like i was going to time travel.
just have a good story rehearsed in case you get pulled over.

[Negative]

Hood got dented and was interfering with the engine - Im on my way right now to pick up a new one.
Think that will work?
Knowing Houston's finest and their hatred for fixed up imports I'll be receiving a big ass ticket.

Really what I was wondering is driving without a hood gonna cause anything mechanical or electrical to come loose. etc. I have a pic of my engine bay in my profile.
IDK - I'm just overly worried about my baby.

This post has been edited by Negative: Mar 9, 2007 - 10:50 AM

[LeonStryfe]

Hood got dented and was interfering with the engine - Im on my way right now to pick up a new one.
Think that will work?
Knowing Houston's finest and their hatred for fixed up imports I'll be receiving a big ass ticket.

Really what I was wondering is driving without a hood gonna cause anything mechanical or electrical to come loose. etc. I have a pic of my engine bay in my profile.
IDK - I'm just overly worried about my baby.

Its going to be LOUD .. VERY LOUD =D

IT should be ok as long as it doesnt

1 - RAIN

2 - DUSTY

3 - GET HIT WITH SOMETHING along the way

[Negative]

Loud? you think? What the intake? If this is the case won't GT4 hood also be loud?

[frosty]

no, it wouldn't be muck louder with a gt4 good. My 'vader hood with its vent didn't make my car louder.

You should be fine w/out the hood. Just check your local weather channel before you go.

Take plenty of pics when you get it!

[Negative]

I've been wanting this hood for 2 years. I'm fixin to get japanese with the camera. LOL.

[NgoFcukinWay]

LOL. Now that i think about it. If I still had T-Spoon, i could've dropped the GT-4 on the car, drop off the hood with you, borrow your stock hood to put back on T-spoon, go back to get my old blue, then scratch our heads trying to figure out how to get your old stocker back home. lol

[OOBE]

LOL.

[Negative]

I need to get the hood. It's killing me. Can we hook up tonight?

[BigAl_UK]

I'm doing this tomorrow. I'm driving up to Oxford with my stock hood on. GT202 is driving across to Oxford with his carbon fibre hood on. When we meet up were swapping hoods and he will store my stock hood for me till I need it

[robdrummer]

i drove with my hood off before, nobody gave me any problems just because there are some street rods around and they don't have hoods. but thats my area

[mneal2_92788]

i had a friend get pulled over for no door and fender so go for it but be careful

[InfamousChappy]

if your that worried about it...drive over there with a hood and switch em. just ditch your oem hood somewhere..unless you planned on selling it.

[Fate]

i drove without the complete front of my car: no hood, no bumper, no fenders. i was fine for a few days but then i got pulled over by a cop and he told me some words of advice: "i better get my wheelwell on because if i hit a person he'll keep going around and around." thanks officer.

[Negative]

if your that worried about it...drive over there with a hood and switch em. just ditch your oem hood somewhere..unless you planned on selling it.

I got plans for it It's a secret so far but I'll be posting that up when I get started.

i drove without the complete front of my car: no hood, no bumper, no fenders. i was fine for a few days but then i got pulled over by a cop and he told me some words of advice: "i better get my wheelwell on because if i hit a person he'll keep going around and around." thanks officer.

Thanks ya'll. I'm gonna wait till dark and then go for it. Wish I could just tarp it or something to keep the cops off me and my peace of mind but my headers will def set that on fire. They almost have burned through the underhood fire retardent blanket looking thing.
On the subject - do you think the GT4 middle vent which will be directly over the header will melt because of the header? If you look at the engine pic in my profile I have thermal wrapped the #1 pipe near the alt to keep the heat off the alt but I really don't like the look of a wrapped header. Then again Jeff @ Toyota world says that vent is on back order so if i fcuk that one up I'll be screwed for a while. Anybody on here with header and GT4 hood? Think I'll smoke it?

While your on my profile please feel free to leave me any comments. I've been on here for a long time and I have almost no comments.

This post has been edited by Negative: Mar 9, 2007 - 2:08 PM

[celicaST]

On the subject - do you think the GT4 middle vent which will be directly over the header will melt because of the header?

its metal, it wont melt. and also, double check to make SURE the hood latches after you put it on. dont pull a rayme

[Negative]

He break his windshield with his $700 hood? That sux.
Yeah I'll be modding a stock latch from a junkyard for this hood. Anybody got any pics or dimensions for how much longer and which part needs to be lengthened? That part is on back order at Toyota world and I can't see buying one when I have a CNC machineshop at my disposal. If some one provides me with the right info I can make a production drawing for all of us so that we can have them done professionally. Also I'd be willing to do it for free if anyone needs theirs lengthened.
Check the TRD quickshifter thread for an example of a spacer I drafted for that. I can provide drawings in scanned or .DXF formats.
As always I will help anyone with this stuff for free or materials. I can't see charging you guys. the way I see it we are all in this together.

[NgoFcukinWay]

I think it needs to be lengthened half an inch.

Won't be able to meet up tonight. Dinner with gf and her 'rents probably.

I just remembered that my dad has a truck, but I don't know if he'll let me borrow it for a day. What we can do is like what someone just said previously: go down with your stock hood, swap out, then I can bring you your stocker back when I can get my hands on a truck. The hood latched close on T-Spoon, but I'm not sure about Elis@beth. Let me know when you're free. I can go tomorrow at 1 with you if you're free, if not, then it'll have to be Sunday morning or something.

This post has been edited by NgoFcukinWay: Mar 9, 2007 - 3:59 PM