 gauge light not working, GRRR |
  |
 Mar 29, 2007 - 4:02 PM
|
 
|
 Enthusiast  Joined Feb 14, '07 From Provo, UT USA Currently Offline Reputation: 25 (100%)  |
couple days ago i changed my turn signals to be red instead of green last night when i drove it to get some food one of the lights in the dash wouldn't work. it was the one that lights up the right side of the gauges. i took out the gauges again checked the connection and it seemed to be connected just fine. then i tried it again to see if it would work. and it did and so i put it all back in and tried it again to make sure and now it didn't.
 wtf? please someone tell me that this would be an easy fix. i am going to take it apart again tonight but if there are any pointers that would be much appreciatted. thanks guys
--------------------  Call me a traitor! See if I care. ;) |
|
Mar 30, 2007 - 7:00 AM
|
|
 Enthusiast Joined Aug 9, '06 From Ma Currently Offline Reputation: 1 (100%) |
You changed the actual bulb in the cluster?
Or just the rubber/plastic "condom" on it? It sounds like a bad connection. --------------------  |
|
Mar 30, 2007 - 10:12 AM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
I had the kind of same problem last night. Except i shorted out the A/C controls while working with them. Right after that i felt smoke. What happened, the circuit board burned one of the little copper roads, i lost the illumination.
Solution: I soldered a bridge with a small wire and soldering paste, to make up the connection. Chek bulbs first, then check if any of the conections are burned,. If in doubt i will have an expert take a look at it. Hope it helps. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Mar 30, 2007 - 5:12 PM
|
|
|
Enthusiast Joined Feb 14, '07 From Provo, UT USA Currently Offline Reputation: 25 (100%) |
hey thanks for the help. i went to radio shack and got some new bulbs and i guess that was the problem. the only thing that made me wonder is that it turned back on for a second then back off as if it was a wiring problem. well hopefully that was all that was wrong with it. i
-------------------- Call me a traitor! See if I care. ;) |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 5:37 PM |