where can i get strut bars Options

[95st-celica]

I was wonderin where i can buy strut bars at?? does anyone know if the 7th gens on ebay will fit our cars? or does anyone have one for sale? eventually i would like to get a front and rear one and then get front and rear sway bars to...that will really stiffen up the ride

[goferris]

I was wonderin where i can buy strut bars at?? does anyone know if the 7th gens on ebay will fit our cars? or does anyone have one for sale? eventually i would like to get a front and rear one and then get front and rear sway bars to...that will really stiffen up the ride

you can get a neon strut bar and modify it for the front and for the back you can order the gt4 strut bar from toyota world. i have the part # somewhere but it only costs like 70 shipped so it isn't too bad.

[BBoYRuGGeD]

the gt4 rear strut bar only cost 70 bucks? wow...lemme get that part number

bboy

[95st-celica]

I was wonderin where i can buy strut bars at?? does anyone know if the 7th gens on ebay will fit our cars? or does anyone have one for sale? eventually i would like to get a front and rear one and then get front and rear sway bars to...that will really stiffen up the ride

you can get a neon strut bar and modify it for the front and for the back you can order the gt4 strut bar from toyota world. i have the part # somewhere but it only costs like 70 shipped so it isn't too bad.

a neon strut bar like this one?:

http://cgi.ebay.com/ebaymotors/95-96-97-98...106754453QQrdZ1

[mr_dude]

the gt4 rear strut bar only cost 70 bucks? wow...lemme get that part number

bboy

60T/5360520020

Mine cost me $95 altogether (tax and it had to be sailed over from Japan). If only they made a front...

[goferris]

the gt4 rear strut bar only cost 70 bucks? wow...lemme get that part number

bboy

go to toyotaworld.com and here's the part #
53605-20020 rear strut bar $64.81
64333-20160-C0 rear strut bar covers $11.97
53607-20050 front strut bar $57 (i think that one is right)

I was wonderin where i can buy strut bars at?? does anyone know if the 7th gens on ebay will fit our cars? or does anyone have one for sale? eventually i would like to get a front and rear one and then get front and rear sway bars to...that will really stiffen up the ride

you can get a neon strut bar and modify it for the front and for the back you can order the gt4 strut bar from toyota world. i have the part # somewhere but it only costs like 70 shipped so it isn't too bad.

a neon strut bar like this one?:

http://cgi.ebay.com/ebaymotors/95-96-97-98...106754453QQrdZ1

i think so but not quite sure on that one.

[celicadude04]

Those part numbers are right, I just order everything last week. and that is the exact bar for the Neon I bought too. BTW 90119-10409 is the part number for the two bolts that hold the front bar to the fire wall.

[6strngs]

http://www.6gc.net/forums/index.php?showto...mp;hl=strut+bar

any adjustable two-point 95-99 dodge neon strut bar will work. so the one in the link up a couple posts will work fine.

OR for a proper srtut bar actually made for our car:
TRD
C-one
J-speed

for the rear, it's either a GT-four. or the J-speed 3-point.

[95st-celica]

http://www.6gc.net/forums/index.php?showto...mp;hl=strut+bar

any adjustable two-point 95-99 dodge neon strut bar will work. so the one in the link up a couple posts will work fine.

OR for a proper srtut bar actually made for our car:
TRD
C-one
J-speed

for the rear, it's either a GT-four. or the J-speed 3-point.

there all a little pricey...i could proably fab somethin up for a hell of a lot less then that 3 point first one and make it look 100% better for the money

[Sinyk]

I just ordered the GT-Four rear strut bar with the strut tower covers. The bar was $129 Canadian and the covers were $26 each from my local Toyota dealership. No troubles ordering them, all the numbers worked, I didn't even need to tell them what it was for. Said the parts are coming out of California and should take probably 4-7 days (because of the weekend).

I'll probably snag a neon bar for the front. It seems to be the more affordable way to go.

My 96 GT-S has the stock 3 point front bar that mounts to the firewall so would I be able to install the neon bar and leave the stock one on as well? Is it worth adding the strut bar if I already have this one?

This post has been edited by Sinyk: Apr 27, 2007 - 11:06 AM

[undasighted]

not really.

[6strngs]

My 96 GT-S has the stock 3 point front bar that mounts to the firewall so would I be able to install the neon bar and leave the stock one on as well? Is it worth adding the strut bar if I already have this one?

I'll post it again:
http://www.6gc.net/forums/index.php?showto...mp;hl=strut+bar

[playr158]

too bad the neon ones are really weak......even after it was tight and bolted on my car it would flex..boo

[azian_advanced]

the stock strut bar didn't help much imo... the car needed something that links the two strut mounts together. so you should feel a difference after putting a neon bar in with the stock 3-point bar (provided that the neon bar is a tight fit)

[trdproven]

they are selling a TRD strut bar at ebay.

[Sinyk]

You mean the one for $200 US that is all scratched to hell with a big dent in it?


here