6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> FS: Parts, Original parts off the vert for sale
post May 5, 2007 - 12:34 PM
+Quote Post
JonMarkos



Enthusiast
**
Joined Jun 13, '06
From Omaha, Nebraska
Currently Offline

Reputation: 11 (100%)




OEM GT front and rear sway bars with brackets

OEM Convertible sideskirts including all plugs, clips and screws intact

OEM Coupe/Convertible Taillights...these are missing a couple of the screws in back that help hold them onto the car, I never had any problems but if someone is interested I can take pictures.



--------------------
IPB Image

We shall show mercy, but we shall not ask for it.
post May 5, 2007 - 1:06 PM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




I dont think the skirts work on a hatch, but if someone can confirm they do, I'll take them.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post May 5, 2007 - 3:27 PM
+Quote Post
Celiracer18



Enthusiast
****
Joined Aug 23, '05
From Princeton, Minnesota
Currently Offline

Reputation: 7 (100%)




how much for the skirts?


--------------------
-Brian

IPB Image
post May 5, 2007 - 8:44 PM
+Quote Post
MaskedMan



Enthusiast
*****
Joined Jun 29, '03
From 캘리포니아
Currently Offline

Reputation: 23 (100%)




QUOTE(95CelicaST @ May 5, 2007 - 11:06 AM) [snapback]554470[/snapback]
I dont think the skirts work on a hatch, but if someone can confirm they do, I'll take them.


The stock skirts should only work on the convertible models.


--------------------

post May 5, 2007 - 9:40 PM
+Quote Post
goferris



Enthusiast
*****
Joined Feb 14, '07
From Provo, UT USA
Currently Offline

Reputation: 25 (100%)




QUOTE(MaskedMan @ May 5, 2007 - 7:44 PM) [snapback]554570[/snapback]

QUOTE(95CelicaST @ May 5, 2007 - 11:06 AM) [snapback]554470[/snapback]
I dont think the skirts work on a hatch, but if someone can confirm they do, I'll take them.


The stock skirts should only work on the convertible models.

i have heard that skirts are interchangeable on all celis
only the rear end is diff.
coupe and vert are longer


--------------------

Call me a traitor! See if I care. ;)
post May 5, 2007 - 10:05 PM
+Quote Post
j0e_p3t



Enthusiast
*****
Joined Dec 8, '05
From torrance/carson, ca
Currently Offline

Reputation: 11 (100%)




skirts will fit any 6gc.


--------------------
IPB Image
ss-iii splitters and 404 skirts are on. which means i need to update my sig.
post May 5, 2007 - 11:26 PM
+Quote Post
JonMarkos



Enthusiast
**
Joined Jun 13, '06
From Omaha, Nebraska
Currently Offline

Reputation: 11 (100%)




100 plus shipping for the skirts sound fair enough to anyone?


--------------------
IPB Image

We shall show mercy, but we shall not ask for it.
post May 6, 2007 - 2:34 AM
+Quote Post
MaskedMan



Enthusiast
*****
Joined Jun 29, '03
From 캘리포니아
Currently Offline

Reputation: 23 (100%)




QUOTE(goferris @ May 5, 2007 - 7:40 PM) [snapback]554583[/snapback]
QUOTE(MaskedMan @ May 5, 2007 - 7:44 PM) [snapback]554570[/snapback]

QUOTE(95CelicaST @ May 5, 2007 - 11:06 AM) [snapback]554470[/snapback]
I dont think the skirts work on a hatch, but if someone can confirm they do, I'll take them.


The stock skirts should only work on the convertible models.

i have heard that skirts are interchangeable on all celis
only the rear end is diff.
coupe and vert are longer


But the stock skirts on convertibles are different, they have clips in the back that just push into the body from the sides. This is why ALL convertibles have factory side skirts, becuase if they didn't then there would be a square beam with holes in it showing. The fenders on convertibles are also different too. The part of the fender hiding under the stock skirts has a bolt going through the side of it.


--------------------

post May 6, 2007 - 2:55 PM
+Quote Post
eyohannie



Enthusiast
*
Joined May 20, '05
From San Diego, California
Currently Offline

Reputation: 0 (0%)




QUOTE(MaskedMan @ May 6, 2007 - 2:34 AM) [snapback]554638[/snapback]

QUOTE(goferris @ May 5, 2007 - 7:40 PM) [snapback]554583[/snapback]
QUOTE(MaskedMan @ May 5, 2007 - 7:44 PM) [snapback]554570[/snapback]

QUOTE(95CelicaST @ May 5, 2007 - 11:06 AM) [snapback]554470[/snapback]
I dont think the skirts work on a hatch, but if someone can confirm they do, I'll take them.


The stock skirts should only work on the convertible models.

i have heard that skirts are interchangeable on all celis
only the rear end is diff.
coupe and vert are longer


But the stock skirts on convertibles are different, they have clips in the back that just push into the body from the sides. This is why ALL convertibles have factory side skirts, becuase if they didn't then there would be a square beam with holes in it showing. The fenders on convertibles are also different too. The part of the fender hiding under the stock skirts has a bolt going through the side of it.


Are you sure? I have seen convertibles with no side skirts before, although they may be pre-1996.


--------------------
IPB Image
post May 6, 2007 - 3:14 PM
+Quote Post
96bluevert



Enthusiast
*****
Joined Mar 19, '07
From Washington
Currently Offline

Reputation: 9 (100%)




QUOTE(eyohannie @ May 6, 2007 - 7:55 PM) [snapback]554728[/snapback]

QUOTE(MaskedMan @ May 6, 2007 - 2:34 AM) [snapback]554638[/snapback]

QUOTE(goferris @ May 5, 2007 - 7:40 PM) [snapback]554583[/snapback]
QUOTE(MaskedMan @ May 5, 2007 - 7:44 PM) [snapback]554570[/snapback]

QUOTE(95CelicaST @ May 5, 2007 - 11:06 AM) [snapback]554470[/snapback]
I dont think the skirts work on a hatch, but if someone can confirm they do, I'll take them.


The stock skirts should only work on the convertible models.

i have heard that skirts are interchangeable on all celis
only the rear end is diff.
coupe and vert are longer


But the stock skirts on convertibles are different, they have clips in the back that just push into the body from the sides. This is why ALL convertibles have factory side skirts, becuase if they didn't then there would be a square beam with holes in it showing. The fenders on convertibles are also different too. The part of the fender hiding under the stock skirts has a bolt going through the side of it.


Are you sure? I have seen convertibles with no side skirts before, although they may be pre-1996.


I don't doubt it. side skirts were optional from factory.


--------------------
"A true car enthusiast can see the potential in any car"



QUOTE (njccmd2002 @ Oct 3, 2008 - 2:01 PM) *
i rather be a slow turtle in risk of extinction, than a fast locust, that you can see everywhere and need to be terminated.
post May 6, 2007 - 9:14 PM
+Quote Post
MaskedMan



Enthusiast
*****
Joined Jun 29, '03
From 캘리포니아
Currently Offline

Reputation: 23 (100%)




QUOTE(96bluevert @ May 6, 2007 - 1:14 PM) [snapback]554735[/snapback]
QUOTE(eyohannie @ May 6, 2007 - 7:55 PM) [snapback]554728[/snapback]

QUOTE(MaskedMan @ May 6, 2007 - 2:34 AM) [snapback]554638[/snapback]

QUOTE(goferris @ May 5, 2007 - 7:40 PM) [snapback]554583[/snapback]
QUOTE(MaskedMan @ May 5, 2007 - 7:44 PM) [snapback]554570[/snapback]

QUOTE(95CelicaST @ May 5, 2007 - 11:06 AM) [snapback]554470[/snapback]
I dont think the skirts work on a hatch, but if someone can confirm they do, I'll take them.


The stock skirts should only work on the convertible models.

i have heard that skirts are interchangeable on all celis
only the rear end is diff.
coupe and vert are longer


But the stock skirts on convertibles are different, they have clips in the back that just push into the body from the sides. This is why ALL convertibles have factory side skirts, becuase if they didn't then there would be a square beam with holes in it showing. The fenders on convertibles are also different too. The part of the fender hiding under the stock skirts has a bolt going through the side of it.


Are you sure? I have seen convertibles with no side skirts before, although they may be pre-1996.


I don't doubt it. side skirts were optional from factory.


By sideskirts, we're talking about that unpainted black plastic piece that is clipped onto the side of convertibles and is two pieces right? Becuase i have never seen a Celica convertible without these from the factory. From my knowlege this part of the car is different and the beam behind the sideskirt is used as a reinforcement for the body which is why it's on convertible only. But anyways, this isn't my thread and i shouldn't thread jack anymore. Someone just buy the skirts and let us know what you find out wink.gif.


--------------------

post May 7, 2007 - 4:42 PM
+Quote Post
JonMarkos



Enthusiast
**
Joined Jun 13, '06
From Omaha, Nebraska
Currently Offline

Reputation: 11 (100%)




Yes Maskedman, that is the part that I am talking about. I don't believe these will fit on celicas other than convertibles but I have never tried.


--------------------
IPB Image

We shall show mercy, but we shall not ask for it.

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 29th, 2024 - 4:28 PM