which boost controller??? Options

[toyotacrazy]

I just got my alcohol injection. Im working on getting that set up. I want to run about 15-16 psi of boost. I bought a turbotechnics mbc and I hate it! I cant get it to work correctly. It either boosts too high, too low, spools slowly then boost creeps and so on. Ive hooked it up several different ways and no luck. Im thinking about getting an electronic boost controller. Any suggestions? I also need to raise my boost limiter. I dont want to eleminate it though. Does anyone know if these boost cut defenders eleminate boost cut or if you can raise it slowly???? Thanks

[BBoYRuGGeD]

i use TwosRUs mbc and it works great. never owned a ebc so cant give u advice there. for fuel cut, the ones u buy i read will give u a 22psi or 20psi boost cut at the lowest. or u can make a fully adjustable FCD and set ur cut at ano boost level: http://toymr2.tripod.com/fcd.html that'll show ya how to make one for under 20 bucks. i did it and it works fine.

bboy

[2slow2nervous]

i have a hulman mbc and it works great. I have no probs with it and picked it up for under 100.00. Spools quick always acurate.

[toyotacrazy]

I just bought a used blitz EBC for $200 type R.

[94GT]

i use TwosRUs mbc and it works great. never owned a ebc so cant give u advice there. for fuel cut, the ones u buy i read will give u a 22psi or 20psi boost cut at the lowest. or u can make a fully adjustable FCD and set ur cut at ano boost level: http://toymr2.tripod.com/fcd.html that'll show ya how to make one for under 20 bucks. i did it and it works fine.

bboy

X2. I've got the twosrus one on my MR2, and it's great.

This post has been edited by 94GT: May 29, 2007 - 1:14 AM

[GTSOwner]

Used to have the turbosmart boost tee. Fantastic.

[Supersprynt]

I used a Joe P mbc for awhile and found it excellent.

I'm now using an Apexi AVCR

[Kadett]

New HKS EVC VI boost controller has probably the solution of your problem.

[lagos]

i have a greddy type-s. works great and very simple to use.

[eggman40]

I use a Turbo XS dual stage boost controller. Its a mbc but there are two of them which can be controled at the flick of a switch between two presets. I have mine set at 8psi and 15psi.



I love having the peace of mind of a MBC, and with this one, theres no need to get out of the car to change the setting



http://www.discountpowerparts.com/catalog/...roducts_id=1288

[CilverSeliST205]

I'm now using an Apexi AVCR

Do you like it? is it worth the price? i know i would have to splice into some ecu wires but thats not a problem. Did you test out any features yet?

[toyotacrazy]

I just bought a used blitz EBC for $200 type R.

I love my blitz type R. Its simple to use once you mess around with the functions for a while. It has some nice features like overboost warning and overboost protection.