![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Aug 5, '06 From Maryland Currently Offline Reputation: 2 (100%) ![]() |
So I saw an eclipse today who flat blacked his tail lights, signals, etc. I don't think the light will get through the flat black paint well enough, but has anybody tried that tint stuff on them?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
I used the spray tint stuff on my side markers and turn signals. I am going to have to redo it soon because it is starting to flake off. I suppose more clear next time
![]() -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 16, '06 From Maryland Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(95CelicaST @ Mar 30, 2007 - 10:18 AM) [snapback]541348[/snapback] I used the spray tint stuff on my side markers and turn signals. I am going to have to redo it soon because it is starting to flake off. I suppose more clear next time ![]() where did you get it at??? the lights seem to shine through fine on the cars that ive seen with it. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
Yeah light will shine through it. It would be illegal if it didn't. Look at the pictures in my profile. One of them you can see that they are black, and the night picture you can see the turn signals. I don't recall where I got them, but I am going to strip all the crap off of them and when I have my front bumper repainted I am going to have them spray my turn signals with a light layer of the black and clearcoat them.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) ![]() |
I used the smoked-out vinyl tint from r-vinyls. Check in my profile or look in the flashbacks thread in the General Discussions.
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 9, '05 From Oakland, Cali Currently Offline Reputation: 46 (100%) ![]() |
use TESTORS transparent black paint for yoru plastics.....worked great!!!!..
maybe walmart has em...if not, order em from ebay/testors website -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Aug 5, '06 From Maryland Currently Offline Reputation: 2 (100%) ![]() |
Awesome! Thanks for the replies, I'll check out Testors and r-vinyls!
|
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jul 29, '03 From north of detroit Currently Offline Reputation: 6 (100%) ![]() |
also, look up VHT nite-shades. see my profile for pics of the effects...lights are 100% visible when lit.
-------------------- ![]() do you know who i am, mr. worley? |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Aug 5, '06 From Maryland Currently Offline Reputation: 2 (100%) ![]() |
I looked for all three, the VHT looks like it's the best bet for this application. It's only $20 for a can on eBay, so I may get it off of there. How many cans for the four markers and two tails you think? Also which can is the one you used uberschall?
edit: btw will this stuff chip like 95CelicaST said his did? Should I clear ontop of it? This post has been edited by phokur: Mar 30, 2007 - 9:46 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
Well its not "chipping", its more "cracking" right above where the bulb is. It hasn't flaked off or anything, but make sure you put a bit of clear on it. I only did 1-2 layers, but then again that was back in the beginning of 2005..
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 1, '06 From Michigan Currently Offline Reputation: 0 (0%) ![]() |
Tried this stuff on my headlights and it startd to crack... O_O, but on the tail lights it looks really sexy. If you mess up use gas, it takes the paint off without doing too much harm to the clear coat of your car.
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
.. you should probably remove the signals and such from the car before you start painting, especially if you need to dump gas on it..
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jul 23, '06 From Chester - UK Currently Offline Reputation: 0 (0%) ![]() |
done all mine on most of my cars, love the look!
-------------------- My Celica Is Now For Sale
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 30, '03 From O-town, FL Currently Offline Reputation: 0 (0%) ![]() |
I used VHT Nite Shades with great success on mine. Light comes through still. Use it until you're happy with the shade.
-------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 19, '06 From North NJ Currently Offline Reputation: 16 (100%) ![]() |
![]() heres a pic of mine. well if you smoke out your tail lights make sure you DO put clear coat on top. you could get acrylic clear coat at any PEARL paint shop thats where i got mine. as for VHT Nite Shade you could pick that up at a car shop or autozone or something. and if you do decide to smoke it heres a tip.. if you want to make it look darker dont keep on spraying.. spray one layer, let it dry, once its fully dry, add another layer and so forth.. have fun ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Aug 5, '06 From Maryland Currently Offline Reputation: 2 (100%) ![]() |
That's hawt! Did you remove the tails to do that? The front signals look easy to remove so I'll definitely do those, but the tails look like a possible pita.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 16, '06 From Maryland Currently Offline Reputation: 0 (0%) ![]() |
^the tails are extremely easy to remove, when you open the hatch, on the back there are 6 "plugs" with little light bulbs on them (3 on each side) pop those off, then get a 10mm socket and take the nuts off and the tails will fall right out.
|
![]() |
|
![]() Enthusiast ![]() ![]() Joined Aug 5, '06 From Maryland Currently Offline Reputation: 2 (100%) ![]() |
Oh cool, I may have to then... how about the third brake light in the hatch?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 16, '06 From Maryland Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(phokur @ Apr 3, 2007 - 9:27 PM) [snapback]542852[/snapback] Oh cool, I may have to then... how about the third brake light in the hatch? i havent tried to get it out before, but it looks like it might be pretty tough. |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 19, '06 From North NJ Currently Offline Reputation: 16 (100%) ![]() |
yeah i took out the tail lights to do them.. make sure you get newspaper and put them underneath that.. remember also the advice in my other post lol
|
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 5:05 PM |