 removing sticker residue from oem skirts, tried all the stuff |
  |
 Jun 26, 2007 - 3:02 AM
|
 
|
 Enthusiast  Joined Mar 9, '05 From Oakland, Cali Currently Offline Reputation: 46 (100%)  |
tried wd-40, pb blaster, goo-gone, thinner...EVERYTHING i can think of and these bastard things jus dont wanna get off me oem side skirts.... any tips?????
--------------------  |
|
Jun 26, 2007 - 7:23 AM
|
|
 Enthusiast Joined Jul 8, '04 From Durham, NC Currently Offline Reputation: 6 (100%) |
QUOTE(DeW_H0e_GT @ Jun 26, 2007 - 8:02 AM) [snapback]572185[/snapback] tried wd-40, pb blaster, goo-gone, thinner...EVERYTHING i can think of and these bastard things jus dont wanna get off me oem side skirts.... any tips????? I used some bumper sticker remover that I bought from AutoZone I believe. What I did was scrape away as much as I could first, then spray the area well and wait 3 -4 minutes to let it soak in. Then I scraped off a little more. It takes a while but if you keep repeating this eventually you can get it all off. --------------------  |
|
Jun 26, 2007 - 2:18 PM
|
|
|
Enthusiast Joined Mar 9, '05 From Oakland, Cali Currently Offline Reputation: 46 (100%) |
goood deal ill try it later....
-------------------- |
|
Jun 26, 2007 - 2:25 PM
|
|
 Enthusiast Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
goo gone works, you gotta rub it in with your fingers not a towel. chanh thought me this and it works really well
--------------------  |
|
Jun 26, 2007 - 2:30 PM
|
|
|
Enthusiast Joined Mar 9, '05 From Oakland, Cali Currently Offline Reputation: 46 (100%) |
fingers huh?..ill try it....
-------------------- |
|
Jun 28, 2007 - 2:58 PM
|
|
 Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
haha.. that took me a while to remove to...
. i used a torch and bumper sticker remover spray in tandem.. then after it became more pliable, i scraped and sanded it off. -------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
|
Jun 28, 2007 - 3:58 PM
|
|
|
Enthusiast Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
a towel just absorbs the goo gone and wont work, use fingers
-------------------- |
|
Jul 6, 2007 - 10:54 PM
|
|
|
Enthusiast Joined Mar 9, '05 From Oakland, Cali Currently Offline Reputation: 46 (100%) |
teh oem skirts have 2 clear film on the backside.....
the finger/goo gone trick works but only for the top portion....the bottom portion of the residue i jus use 60 grit sandpaper..and its REALLY messy..... -------------------- |
|
Jul 6, 2007 - 11:00 PM
|
|
|
Enthusiast Joined Oct 18, '06 From cincinnati Currently Offline Reputation: 10 (100%) |
try some epoxy or rubber cement. rubber cement worked for me, but don't leave it on too long otherwise it'll just make the situation worse... g.l.
-------------------- proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]
309,000 miles n' .... |
|
Jul 7, 2007 - 12:31 AM
|
|
|
Enthusiast Joined Jul 8, '04 From Durham, NC Currently Offline Reputation: 6 (100%) |
heat up the stuff maybe with a heat gun and its easier to rub off with your fingers.
-------------------- |
|
Jul 7, 2007 - 2:11 AM
|
|
 Enthusiast Joined Feb 14, '07 From Provo, UT USA Currently Offline Reputation: 25 (100%) |
QUOTE(DeW_H0e_GT @ Jul 6, 2007 - 9:54 PM) [snapback]575771[/snapback] teh oem skirts have 2 clear film on the backside..... the finger/goo gone trick works but only for the top portion....the bottom portion of the residue i jus use 60 grit sandpaper..and its REALLY messy..... huh... i just peeled mine off and they didn't have a sticky residue  gl with that. --------------------  Call me a traitor! See if I care. ;) |
|
Jul 7, 2007 - 12:18 PM
|
|
|
Enthusiast Joined Jul 8, '04 From Durham, NC Currently Offline Reputation: 6 (100%) |
Lol. If you peel off the clear stickers in a certain way it will get most of the residue off. You have to peel it off steadily and dont stop because if you stop pulling for a second it will leave a line of residue where you stopped. I don't know if that makes sense but anyway...
-------------------- |
|
Jul 7, 2007 - 9:04 PM
|
|
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
Mac tools sells a rubber/plastic attachment for a drill chuck. Its a wheel that you can spin right on paint and will remove glue, stickers, adhesive, etc. Just be carefull not to spend too much time in one spot or spin it up too fast. Itll take the paint right off! Especially on plastic. I believe you can get this for $15-$20.
|
|
Jul 9, 2007 - 2:44 PM
|
|
|
Enthusiast Joined Jul 8, '04 From Durham, NC Currently Offline Reputation: 6 (100%) |
Interesting, would an auto store have this you think?
-------------------- |
|
Jul 9, 2007 - 4:46 PM
|
|
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
QUOTE(RbrtNdrws @ Jul 9, 2007 - 2:44 PM) [snapback]576509[/snapback] Interesting, would an auto store have this you think? probably not. Ill try to find it on mac or snap on website |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 2:47 PM |