94 clear corner lights, w/ 93 clears or other ways? Options

[Jlacker3]

I know there have been numerous posts about this. But I cannot find any pics of anyone installing the 93 clear corners on a 94. Everyone says it has to be pushed in more, but I was wondering what it looks like and how hard it is to do. I just know I would screw up the DIY clears...put them in an oven?? I found the guy selling the 94's on here, but its WAY out of my budget. I don't want to spend over $75 for both. Any help would be much appreciated.

Thanks!

[Jaws4God]

I think these are 5th gen turns:


1. My friend heated mine up in the oven
2. pulled off the amber lense
3. then we took a frosted white notebook - cut out the same shape as turns
4. glued them onto the light.




This post has been edited by Jaws4God: Jul 10, 2007 - 2:28 PM

[celiracer]

I have the zyclone front bumper. But i also have the 5th gen clear turns on my car. I think they look good.

[layhum]

I have the zyclone front bumper. But i also have the 5th gen clear turns on my car. I think they look good.

Would I need to modify any wiring?

[Jlacker3]

Hey guys, thanks for the help. I went ahead and ordered 5th gen turns. I didn't want to mess with gluing and all that stuff although I did cut the brackets off. I just had to re-drill the hole on them and on the other side of the light I actually just wedged a flat piece of rubber between the light and body. I've been driving it for a week and a half and they still don't budge, lol. They are barely crooked, but they still look 10x better to me than the stock ones. Sorry my car hadn't been washed in a while! Opinions?

BEFORE:





AFTER:








This post has been edited by Jlacker3: Jul 29, 2007 - 11:27 AM

[goferris]

look at the last pic. is that a chip in your head light lense?
personally i am glad that they changed to a clear lense on the facelifted model. but i think that i am going to purchase a roll of tint and tint them and the sidemarkers black.

[Jlacker3]

Ya there's a chip/more like a crack on my right high and low beam...rocks or something hit them on the highway : /

They don't bother me that much...I'm not sure how the tint would turn out..I just really like the clears.

This post has been edited by Jlacker3: Jul 26, 2007 - 9:18 PM

[manphibian]

Hmmm, they don't fit too well IMHO. Wolfie308 on here sells PERFECT clear markers. PM him for details. Not cheap, but 1000 times better.

Here's mine:

[Jlacker3]

Thanks for the opinions...

I looked @ Woflie's first...they're about 4 times more expensive though than these...just way too much for clear blinkers IMHO.

And no layum you don't have to modify any wiring.