adding a second battery |
adding a second battery |
Jul 22, 2007 - 2:39 PM |
|
Enthusiast Joined Feb 27, '07 From cape coral/ft myers florida Currently Offline Reputation: 7 (100%) |
what do i need to do this
im wanting to add another in my engine bay do i just need to split the power and grounds to each battery? and then hook up what i want on the second battery? -------------------- BOOST GETS YOU LAID!!!! |
Jul 22, 2007 - 7:17 PM |
|
Enthusiast Joined Mar 14, '05 From Auckland,New Zealand Currently Offline Reputation: 1 (100%) |
|
Jul 22, 2007 - 9:04 PM |
|
Enthusiast Joined May 10, '07 From Lubbock, Texas Currently Offline Reputation: 2 (100%) |
how hard is it to relocate my batt. to the deck (trunk)
-------------------- feedback feedback If I buy or sale please leave me feedback...thanks cheap, quick, reliable, pick two I treat my 6gc better then my own woman |
Jul 23, 2007 - 12:25 AM |
|
Enthusiast Joined Mar 14, '05 From Auckland,New Zealand Currently Offline Reputation: 1 (100%) |
Run 1 gauge cable from engine to trunk . Add a circuit breaker in line if possible(to prevent cable getting pinched etc exposing the wires which will cause a short and start a fire)
If battery is sealed then no worries having it anywhere in the trunk. Otherwise, you need to vent it. |
Jul 23, 2007 - 3:02 AM |
|
Enthusiast Joined May 10, '07 From Lubbock, Texas Currently Offline Reputation: 2 (100%) |
WHAT is the best type (brand) of batt for this and i have alot to power...lights spekers ect.....
http://www.6gc.net/forums/index.php?showtopic=29444 This post has been edited by Dragondog: Jul 23, 2007 - 3:03 AM -------------------- feedback feedback If I buy or sale please leave me feedback...thanks cheap, quick, reliable, pick two I treat my 6gc better then my own woman |
Jul 23, 2007 - 3:13 AM |
|
Enthusiast Joined Mar 14, '05 From Auckland,New Zealand Currently Offline Reputation: 1 (100%) |
Optima Yellowtop would be a good choice. Deep cycle sealed battery.
Me running 0gauge through the celica Convenient grommet next to battery in engine bay Cable ties are your friend Back into the engine bay it goes(you might want to use the hole that leads into interior but I did not want to damage the foam there). Still need to find a rubber grommet to cover the hole or modify the original plastic one a little to accomodate both wires. - Managed to fit cable through plastic grommet which is not shown in pic. Firewall grommet. This post has been edited by soven: Jul 23, 2007 - 3:24 AM |
Lo-Fi Version | Time is now: November 23rd, 2024 - 6:20 PM |