6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> NEED AMP HELP ASAP!!, maybe the remote wire???
post Jul 17, 2007 - 2:02 PM
+Quote Post
stud97023

Enthusiast
*
Joined Feb 18, '07
From Clackamas, Oregon USA
Currently Offline

Reputation: 2 (100%)




i justt hooked up my whole system yesterday. i turned the car on and i had nothing comming out of the speakers. the little light on the amp didnt even light up. I think its either because i grounded it wrong, or because of my remote wire. I attached it to the powerantenna cable comming off the headunit. is this the right wire to splice it to? or did i do it all wrong???
post Jul 17, 2007 - 2:19 PM
+Quote Post
CelicaST_CALI



Enthusiast
*****
Joined Feb 28, '07
Currently Offline

Reputation: 1 (100%)




how did u ground it and where?


--------------------
BANNED. for life, you moron.
post Jul 17, 2007 - 2:43 PM
+Quote Post
94celigts



Enthusiast
**
Joined Jun 13, '07
From Whitby, ON, CAN
Currently Offline

Reputation: 6 (100%)




you should have an amp wire coming from the headunit that u splice into not the antenna wire?
post Jul 17, 2007 - 3:38 PM
+Quote Post
stud97023

Enthusiast
*
Joined Feb 18, '07
From Clackamas, Oregon USA
Currently Offline

Reputation: 2 (100%)




ok, so i grounded it to the side wall behind the trunk siding on the driver side. I just scraped off the paint and screwed the wire down. And i didnt mean the actuall antenna wire, there is a blue wire with a white stripe on it that says power antenna. Thats the one i ment. I dont know tho.....
post Jul 17, 2007 - 6:58 PM
+Quote Post
soven



Enthusiast
***
Joined Mar 14, '05
From Auckland,New Zealand
Currently Offline

Reputation: 1 (100%)




change your headunit to radio and see if the amp turns on.

Otherwise, check the power cable fuse and that the ground cable is connected properly
post Jul 17, 2007 - 7:22 PM
+Quote Post
mneal2_92788



Enthusiast
****
Joined Nov 7, '06
From Lawrence IN, 46226
Currently Offline

Reputation: 17 (100%)




splice into the all blue power wire for the headunit. then makesure your ground is on bare metal.

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 21st, 2025 - 11:35 AM