Clear turn signals Options

[wolfie308]

Oh I didn't know it was the same dude. Glad to hear they aren't 350. But IMO 150 for turn signals is crazy. Glad I have 96 bumper

Yeah, it's almost cheaper to just replace the whole bumper

Only just seen this thread

As Manphibian has tried to tell you, I am THE only person making OEM style/quality replacement lenses for the pre face lift ST/GT modelS which will give a perfect fit. The lenses are easily refitted to your original stock backings.

Price is the price as they're individually hand cast, using the highest grade(expensive) industrial materials. It's not quite the same as casting garden ornaments or paperweights

If they were the same price in $'s as £'s, I'm sure they'd sell like hot cakes, so sales are mostly to U.K and Europe. Although there are a few guys on here with them fitted too

Oh and before someone asks, the actual price is £67.50 GBP delivered inc bulbs

[cyberrick]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

[wolfie308]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

As stated in my previous post, shipped to your door price is £67.50 GBP inc amber bulbs.

Available from stock

If you'd like to order,payment can be made by Payal to.... richardmarsden@freeuk.com

[GriffGirl]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

As stated in my previous post, shipped to your door price is £67.50 GBP inc amber bulbs.

Available from stock

If you'd like to order,payment can be made by Payal to.... richardmarsden@freeuk.com

That's $167.55 (as of this minute) to us Americans...

[wolfie308]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

As stated in my previous post, shipped to your door price is £67.50 GBP inc amber bulbs.

Available from stock

If you'd like to order,payment can be made by Payal to.... richardmarsden@freeuk.com

That's $167.55 (as of this minute) to us Americans...

Not sure how you're calculating your exchange rate, but if you check www.xe.com they're quoting $2.04/ £1.

This is the interbank rate(I used to be a currency broker) if you allow 7% margin, you should be looking at a 'tourist' rate of about $2.18 making them closer to $147.

Of course they're still expensive, hand made to this quality, they always will be. Wierd huh? and the materials I use are imported from the U.S If was manufacturing over there, I'd probably be charging my £'s prices in $'s........but I'm not. Just think, we're paying £1 per litre for petrol

[kerosene]

or you can take 5th gen lights, and fit em into your car... my car is proof that its possible... Illneversellmycelica is the other proof.... 40 bucks and you can have clears...

[GriffGirl]

I just googled currency exchange and used a calculator from that...

actually XE.com is the one I used, it was the first to pop up on the list...

Now it's saying $137.73. That's why I said "at of this minute" because it'll fluctuate depending on what the stock market is doing and just how crappy the dollar is at any given moment according to the crap that flies out of Dubya's mouth...

This post has been edited by GriffGirl: Oct 17, 2007 - 4:44 PM

[illneversellmyce...]

yeah and they look great. their are many methods to put them on, their only a half inch off from the screw point. kersone used plastic and arcyllic. I fabricated a sheet metal bracket, used sum washers and bolts, snug as a bug, aint going anywhere.

for refrence I have a 1994 st with an invader front bumper

[kerosene]

yeah and they look great. their are many methods to put them on, their only a half inch off from the screw point. kersone used plastic and arcyllic. I fabricated a sheet metal bracket, used sum washers and bolts, snug as a bug, aint going anywhere.

for refrence I have a 1994 st with an invader front bumper

Looks awsome m8... ^^ but ive told you that already...

btw, mine look similar except stock 94 bumper... i can pull pics if you want to see

[lazarpaul]

Yeah man.....please post some.......I'm really interested in getting them.
And also, where'd u buy'em from?

This post has been edited by lazarpaul: Oct 21, 2007 - 5:37 PM

[kerosene]

actually, nick (illneversellmycelli) found them, I was the test victim of us 2...lol... ebay...

CODE

http://cgi.ebay.com/ebaymotors/90-93-TOYOTA-CELICA-CLEAR-BUMPER-SIGNAL-LIGHTS-LAMPS-92_W0QQitemZ160168921426QQihZ006QQcategoryZ33717QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

and as far as my pics go...got them on photobucket, on the picture they are different they are now... mine are acrylic in the area where theres a little hole... so theres no bumper showing and the lights are even...

CODE

http://s228.photobucket.com/albums/ee282/keroseneman/

[lazarpaul]

any way you could post some pics of what they look like now?

This post has been edited by lazarpaul: Oct 21, 2007 - 7:00 PM

[kerosene]

no there isn't i took apart my bumper yesetrdaym along with lights, and everything else... so cant...

[lazarpaul]

how's that acrilic workin'?

[kerosene]

it's good, if you know what you are doing... took me about 3 hrs of playing with it before i got it completely right... lot and lot of work, especially to make it look correct... you can do it a "lazy" way... I've been thinking about mass fabricating the mount i made, depends if i feel like it and if i get some more acrylic...

[Valcor]

So where can you get clear markers for 97 euro models?

[kerosene]

ebay