 Does anybody has these intalled: ProCarParts Reverse Glow Gauges??? |
  |
 Oct 30, 2007 - 3:34 PM
|
 
|
 Enthusiast  Joined Jun 26, '07 From Greece Currently Offline Reputation: 2 (100%)  |
As the title says i want to know if they worth to purchase them. Please tell me your opinion and some pictures installed would be great! Thanks!
-------------------- Face your fears, Live your dreams!!!
|
|
Oct 30, 2007 - 6:21 PM
|
|
|
Enthusiast Joined Jul 4, '07 From US Currently Offline Reputation: 2 (100%) |
there are a few with it here... but wouldnt you ranther have black on blue instead of white on ble
|
|
Oct 30, 2007 - 6:47 PM
|
|
 Enthusiast Joined Jun 16, '06 From Bowling Green KY Currently Offline Reputation: 7 (100%) |
i have it installed. i like them, except you probably want to change your needle colors. culp is selling good LEDS you can use for doing that right now. i still have the stock green and it looks just a little weird :-/
edit: typo 
This post has been edited by tonytutino: Oct 30, 2007 - 6:47 PM -------------------- **If you play My Brute, joing the 6gc.net clan!**
--A section of a kid's actual test that had been scanned--  |
|
Oct 31, 2007 - 2:46 AM
|
|
 Enthusiast Joined Feb 14, '07 From Provo, UT USA Currently Offline Reputation: 25 (100%) |
QUOTE(dtlwrc @ Oct 30, 2007 - 2:34 PM) [snapback]609761[/snapback] As the title says i want to know if they worth to purchase them. Please tell me your opinion and some pictures installed would be great! Thanks! funny thing is i am actually debating on getting those exact gauges LOL. i really want some from speedhut but they are just too much $$$ i don't like the other gauges they sell. if i do get them i am only going to use the 3 main sections and just toss the 2 outside sections that don't even glow as well as get a carbon fiber bezel. --------------------  Call me a traitor! See if I care. ;) |
|
Oct 31, 2007 - 3:22 AM
|
|
 Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
I think black face might be a bit better since our needles are also white... well unless you paint them..
-------------------- |
|
Oct 31, 2007 - 6:59 AM
|
|
|
Enthusiast Joined Jun 26, '07 From Greece Currently Offline Reputation: 2 (100%) |
QUOTE(tomazws @ Oct 31, 2007 - 3:22 AM) [snapback]609977[/snapback] I think black face might be a bit better since our needles are also white... well unless you paint them.. I don't have to paint them because they also have a black version :  But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them:  What is your opinion? This post has been edited by dtlwrc: Oct 31, 2007 - 6:59 AM -------------------- Face your fears, Live your dreams!!!
|
|
Oct 31, 2007 - 11:26 AM
|
|
 Enthusiast Joined Aug 21, '04 From New York City Currently Offline Reputation: 0 (0%) |
i had them and they look awesome.
-------------------- |
|
Oct 31, 2007 - 6:43 PM
|
|
|
Enthusiast Joined Feb 14, '07 From Provo, UT USA Currently Offline Reputation: 25 (100%) |
QUOTE(dtlwrc @ Oct 31, 2007 - 5:59 AM) [snapback]610001[/snapback] QUOTE(tomazws @ Oct 31, 2007 - 3:22 AM) [snapback]609977[/snapback] I think black face might be a bit better since our needles are also white... well unless you paint them.. I don't have to paint them because they also have a black version : But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them: What is your opinion?  like i said that is exactly what i plan on getting on mine then painting the needles blue with some fingernail polish -------------------- Call me a traitor! See if I care. ;) |
|
Oct 31, 2007 - 7:00 PM
|
|
 Enthusiast Joined Oct 1, '07 From Sacramento, CA Currently Offline Reputation: 0 (0%) |
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
|
|
Nov 1, 2007 - 4:42 AM
|
|
 Enthusiast Joined May 29, '07 From Trondheim/Norway Currently Offline Reputation: 1 (100%) |
Maybe some of you guys that have 'em installed can take som pics?
|
|
Nov 1, 2007 - 4:55 AM
|
|
|
Enthusiast Joined Jun 26, '07 From Greece Currently Offline Reputation: 2 (100%) |
QUOTE(peterkos @ Nov 1, 2007 - 4:42 AM) [snapback]610319[/snapback] Maybe some of you guys that have 'em installed can take som pics? Yes, that would be great! I especialy want to see how they look at day! This post has been edited by dtlwrc: Nov 1, 2007 - 4:56 AM -------------------- Face your fears, Live your dreams!!!
|
|
Nov 1, 2007 - 8:28 AM
|
|
 Enthusiast Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
--------------------  |
|
Nov 1, 2007 - 12:24 PM
|
|
 Enthusiast Joined Apr 2, '07 From Great Western Plateau Currently Offline Reputation: 9 (100%) |
QUOTE(94CelicaDragon @ Nov 1, 2007 - 9:00 AM) [snapback]610183[/snapback] Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off. not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$ --------------------  98% completion --- aaRon |
|
Nov 2, 2007 - 4:15 PM
|
|
 Enthusiast Joined Oct 28, '07 From epworth uk Currently Offline Reputation: 3 (100%) |
QUOTE(94CelicaDragon @ Oct 31, 2007 - 7:00 PM) [snapback]610183[/snapback] Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off. iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway --------------------  |
|
Nov 3, 2007 - 1:41 PM
|
|
 Enthusiast Joined Jul 10, '06 From South Carolina Currently Offline Reputation: 6 (88%) |
I've got the ones with the black faces from procarparts, can see pics here in this thread.
http://www.6gc.net/forums/index.php?showtopic=42984&hl= I didn't remove the needles, the faces just slide overtop of the existing needles, and I used thin double sided tape (like carpet tape) to hold them down to the old gauges. Took about an hour from start to finish including wiring. Samantha QUOTE(stevest202 @ Nov 2, 2007 - 5:15 PM) [snapback]610743[/snapback] QUOTE(94CelicaDragon @ Oct 31, 2007 - 7:00 PM) [snapback]610183[/snapback] Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off. iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway |
|
Nov 3, 2007 - 2:35 PM
|
|
|
Enthusiast Joined Jun 26, '07 From Greece Currently Offline Reputation: 2 (100%) |
QUOTE(Velliety @ Nov 3, 2007 - 1:41 PM) [snapback]610863[/snapback] I've got the ones with the black faces from procarparts, can see pics here in this thread. http://www.6gc.net/forums/index.php?showtopic=42984&hl= I didn't remove the needles, the faces just slide overtop of the existing needles, and I used thin double sided tape (like carpet tape) to hold them down to the old gauges. Took about an hour from start to finish including wiring. Samantha QUOTE(stevest202 @ Nov 2, 2007 - 5:15 PM) [snapback]610743[/snapback] QUOTE(94CelicaDragon @ Oct 31, 2007 - 7:00 PM) [snapback]610183[/snapback] Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off. iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway The black ones look really nice at night!!! Anyone with a day picture of white or black gauges???  Thanks!-------------------- Face your fears, Live your dreams!!!
|
|
Nov 3, 2007 - 3:44 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE(lubu @ Nov 1, 2007 - 1:24 PM) [snapback]610386[/snapback] QUOTE(94CelicaDragon @ Nov 1, 2007 - 9:00 AM) [snapback]610183[/snapback] Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off. not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$ do NOT remove the needles. doing that will damage your gauge cluster. these overlays are made to slip over your existing needles, without removing them. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Nov 3, 2007 - 3:48 PM
|
|
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
here is my old setup, with the white reverse glow from ebay.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Nov 4, 2007 - 1:30 AM
|
|
 Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
QUOTE(dtlwrc @ Nov 3, 2007 - 8:35 PM) [snapback]610871[/snapback] ... The black ones look really nice at night!!! Anyone with a day picture of white or black gauges??? Thanks!Here I have white:  And here you can se black ones: 
-------------------- No more replicas... This is evolution... This is SS-four :)
 ________[Featured Celica of 6gc.net @ 2010]_________ |
|
Nov 4, 2007 - 7:37 AM
|
|
|
Enthusiast Joined Jun 26, '07 From Greece Currently Offline Reputation: 2 (100%) |
Thanks Malpaso! These pictures are exactly what i was asking! Many thanks!!!
-------------------- Face your fears, Live your dreams!!!
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 2:30 AM |