Auto 5sfte with dyno vids Options

[cv7713]

congrats man! how long did the install take?

[Batman722]

5sfte > redtop

agreed.

nice job Jeff, looking good now go blow that auto tranny to bits

[boosted95]

so what kinda power are you making with your boost setting? and does that auto tranny feel as shakey as everyone on the 6gc site said it would be?

[playr158]

take a cold side pressure pipe and your intake pipe and go have fittings welded on....get that diverter valve fitted!

[twitchh17]

dont forget that vtec

[devilsden97]

5sfte > redtop

For power, yes.

For originality and the presence of mind that your one of the few to be running a motor thats rarer then a blue moon.

Originality > Power. Always has been, always will be.

[playr158]

vin diesle "by an inch or a mile winning is winning"

Miggy "NUH UH, my motor is more original I WIN!"



function > form
sooner you learn that the sooner you become a real tuner

This post has been edited by playr158: Nov 9, 2007 - 12:26 PM

[devilsden97]

your on a FWD platform. u see what Presure2 and Defgeph put down (235 to 250whp) and they run into traction issues. (which have yet to be resolved) The only answer anyone has been able to find for it, is to throw money at it, till u get it right. (fat rubber, bigger and better and ultimatly more expensive suspension components) And unless your racing....regularly....the originality factor is better then the added 30 to 50hp.

again, its my opinion, and last I check, on these boards, I am entitled to it.

sooner you learn that the sooner you become a real tuner

^And as far as this comment goes, come talk to me when your car IS a car, and not 10k pieces strune about your garage.

[playr158]

aww miggy you make me laugh..

[Chanh55]

shes alive!!!! lil test drive with derrick and weeeee, went easy on her. finally got her to stop leaking coolant because of a few clamps werent on enough

Wow man... when you gonna stop by so that I can detail that baby...

[LewFX]

update:
exhaust is on, car runs like a dream...still trying to figure out the divertor issue.

[lagos]

your on a FWD platform. u see what Presure2 and Defgeph put down (235 to 250whp) and they run into traction issues. (which have yet to be resolved) The only answer anyone has been able to find for it, is to throw money at it, till u get it right. (fat rubber, bigger and better and ultimatly more expensive suspension components) And unless your racing....regularly....the originality factor is better then the added 30 to 50hp.

again, its my opinion, and last I check, on these boards, I am entitled to it.

sooner you learn that the sooner you become a real tuner

^And as far as this comment goes, come talk to me when your car IS a car, and not 10k pieces strune about your garage.

mig... ask any one of us with a turbo celica. we would take lack of traction over an NA beams motor any day. its the type of thing that is only a problem when you go to the track and are trying to run a 1/2 second faster then your last time. in the real world, on the street, its not a problem at all. the traction issues at the track can also be solved by simply lowering boost in lower gears, and a bit of driver skill.

i look at the beams like i look at the silvertop swap. on the internet, you will have a cool car, but in the real world, you'll get owned by just about anything on the road with those motors under your hood.

the 5sfTe and 3sgte might be very common on these forums, but in the land of subaru, mitsu, and hondas that roam the streets, a turbo celica is a very rare and cool thing.

[cv7713]

the 5sfTe and 3sgte might be very common on these forums, but in the land of subaru, mitsu, and hondas that roam the streets, a turbo celica is a very rare and cool thing.

x2

[Kadett]

mig... ask any one of us with a turbo celica. we would take lack of traction over an NA beams motor any day.

You really want an answer for this


Traction issues are only a problem in the wet and if you launch hard, otherwise there aren't any traction issues here. If you are pushing well over 300BHP you probably also have the money to afford this

http://www.racelogic.co.uk/

Not very good for you US guys cuz of the dollar exchange rate (Expect to pay over 3k ATM), but it is fitted on Aston Martins so I think it works

[MaskedMan]

mig... ask any one of us with a turbo celica. we would take lack of traction over an NA beams motor any day.

You really want an answer for this


Traction issues are only a problem in the wet and if you launch hard, otherwise there aren't any traction issues here. If you are pushing well over 300BHP you probably also have the money to afford this

http://www.racelogic.co.uk/

Not very good for you US guys cuz of the dollar exchange rate (Expect to pay over 3k ATM), but it is fitted on Aston Martins so I think it works

In my opinion, those traction control systems do what they are supposed to do and work VERY well. I have tried to lose traction in a vehicle equipped with a similiar system, and It reacts very quickly and I was quite impressed.

However, I believe that it takes the fun out of driving and no longer becomes a competition of driver skill. I have a belief, and I think it's great to get into a car without many computer controlled traction or handling assist because it shows that it's not just the car that wins races, it's the driver. On a track, it seems like having your car completely control your power and traction seems boring. You might as well just be a passenger in the vehicle or a spectator.

5sfte, 3sgte, 4age, 4agze, 3sge, 7afte, 7agte, 7afe, 5sfe, 3sfe, 3zvfe, 3mzfe, 1mzfe, or w/e direction you choose to take is fine. Sometimes we look at the forum and don't see us indivisuals anymore. But what we need to remember is that all of us have our own opinions and choices. Although there have been many 5sfte projects done recently, we need to appreciate the effort all those are putting into the swap itself. We can all try to become original, but originallity does not always overcome function, as we can see with some of the exterior mods a few of us do not favor. If it works, then people will do it. I can understand the importance of not following the crowd, or not wanting to be like everyone else. But we all gotta try things out and see where they take us before we can move onto something new.

And again. Congrats Jeff on the swap. Your car is loud without exhuast. I am glad you got exhaust put on today .

[playr158]

woot for exhaust.

just take the two pipes off and takem down to the local shop to have 1" bungs weld on. go to local autoparts store and find a hose that will fit and us it

[Chanh55]

I demand vids.

[LewFX]

This post has been edited by LewFX: Nov 9, 2007 - 4:22 PM

[Chanh55]

Poor Craig is tired... hahah

[devilsden97]

To keep this thread on topic, and not have it spiral out of hand at the expense of Lew, I'm gonna quote something i said b4, and add 1 final thought on this matter.

again, its my opinion, and last I check, on these boards, I am entitled to it.

Which also means, everyone else on this board is entitled to there own opinions as well.


IF anyone else has a problem with what I said, either suck it up, or take it up with me via PM.