6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Throttle body idea / question.
post Dec 3, 2007 - 2:08 AM
+Quote Post
tads

Enthusiast

Joined Jun 7, '07
From Colfax, IN
Currently Offline

Reputation: 0 (0%)




I was just wondering if anyone has tried this. It looks close and I have all the parts to do it. Has anyone swapped the TB off a 4A-GE to a 5S-FE, the 4A-GE throttle body is about .25in larger, and it looks like might bolt up without modification. I over-bored the TB on my Solara and got a pretty good increase in throttle response, so I figure if this is a strait bolt on for my Celica it might be a nice addition. This wouldn’t cost a dime to do, and everything measured close, so I am going to try it if no one else has done it before.


--------------------
2000 Solara (5S-FE), 2000 Corolla (1ZZ-FE), 1995 Avalon (1MZ-FE), 1994 Celica GT (5S-FE)
http://members.cardomain.com/tadsagendorf
post Dec 3, 2007 - 8:46 AM
+Quote Post
Supersprynt



Enthusiast
*****
Joined Feb 10, '03
From Connecticut
Currently Offline

Reputation: 11 (100%)




We await your results.


--------------------
post Dec 3, 2007 - 1:21 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




QUOTE(Supersprynt @ Dec 3, 2007 - 5:46 AM) [snapback]619204[/snapback]
We await your results.

Ditto!


--------------------
post Dec 3, 2007 - 1:32 PM
+Quote Post
WALKER



Enthusiast
***
Joined Mar 29, '06
From Regina, SK, Canada
Currently Offline

Reputation: 38 (100%)




CelicaTech thread on Throttle Bodies.


--------------------
post Dec 3, 2007 - 2:19 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




That's awesome info... I just wish I understood if/how I could apply it on a 7A-FE


--------------------
post Dec 3, 2007 - 2:58 PM
+Quote Post
BloodyStupidDave...



Enthusiast
***
Joined Nov 14, '06
From Northampton, UK
Currently Offline

Reputation: 5 (100%)




QUOTE(GriffGirl @ Dec 3, 2007 - 7:19 PM) [snapback]619261[/snapback]

That's awesome info... I just wish I understood if/how I could apply it on a 7A-FE


Hmm, so the (3rd gen) 3sge, 7mgte, 1GGTE and 1MZ-FE all have a 60mm throttle body. Do they all have the some bolt pattern, same size butterfly bar and electrically compatible sensors? Any advantage of using one over the others?

The 2jzge is 75mm. Could one swap out a 3sge TB for the 2jzge one and would it make any difference?


--------------------
post Dec 3, 2007 - 8:19 PM
+Quote Post
Kwanza26



Enthusiast
*****
Joined Dec 27, '03
From Nor Cal
Currently Offline

Reputation: 0 (0%)




A larger throttle body means you can potentially move more air... BUT... if the head and cams are not designed to take advantage of that, overall performance increase isn't going to be worth all of the custom fab time needed. IMO, might as well built a whole new intake manifold, because if you're talking about making horsepower... the intake manifold can be seen as a horsepower limiter.


--------------------
"It's ok to be naked girl... I'm an artist!"

1995 AT200 Celica ST: stocked out daily driver...

1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies...

1991 SW2x MR2 n/a: bare bones hardtop model soon to be...
post Dec 4, 2007 - 1:33 AM
+Quote Post
tads

Enthusiast

Joined Jun 7, '07
From Colfax, IN
Currently Offline

Reputation: 0 (0%)




QUOTE(WALKER @ Dec 3, 2007 - 6:32 PM) [snapback]619255[/snapback]


Good thread, I'll see if I can get this done tomorrow.

QUOTE(Kwanza26 @ Dec 4, 2007 - 1:19 AM) [snapback]619374[/snapback]

A larger throttle body means you can potentially move more air... BUT... if the head and cams are not designed to take advantage of that, overall performance increase isn't going to be worth all of the custom fab time needed. IMO, might as well built a whole new intake manifold, because if you're talking about making horsepower... the intake manifold can be seen as a horsepower limiter.


Exactly. If you don't have all the parts lying around it's probably not going to be worth the time / work for a few ponies and slightly quicker throttle response. However, if your driveway looks like a used Toyota dealership and you have multiple parts cars in the garage, well why not try something new biggrin.gif .


--------------------
2000 Solara (5S-FE), 2000 Corolla (1ZZ-FE), 1995 Avalon (1MZ-FE), 1994 Celica GT (5S-FE)
http://members.cardomain.com/tadsagendorf

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 24th, 2024 - 12:45 AM