FS: TRD Front Splitters, COMPLETED *MODS, PLEASE CLOSE* Options

[azian_advanced]

SOLD!!!

i'm selling these corner front splitters made for the gt-four bumper. i've had these on for about a year and a half through gravel, snow and still looks great.

if you don't already know, the difference is that these have a filleted cut at the corner for the gt-four bumper vent. regular ones look like this.

these are fiberglass replicas imported from the U.K. and they fit fairly well.
they are painted the factory 3L2 super red color but has a couple of small gashes on the passenger-side splitter (see below)..

you can see the tiny gash on the upper corner and the lower one was caused by lightly rubbing against a curb.
i have a 3L2 red spray can which i can quickly paint over and cover, but if they're going to be repainted to match yours, then i won't bother.









currently one screw is holding it from the rear (on the fender well side), one is screwed on the front bottom side (to the bumper) and double-sided tape holding it along the top side so it's easy to install.


i'm selling these simply because i bought a new front lip which i'll probably paint and install next summer (jdm ).


asking price: $225 shipped within North America or $250 shipped overseas

This post has been edited by azian_advanced: Mar 28, 2008 - 1:27 PM

[azian_advanced]

bump... price update.

asking price: $175 shipped within North America or $200 shipped overseas

[DEATH]

Only two bolts hold them up along with the double sided tape? Are some of the holes broken or that's just all you get?
I'm interested.

[Chanh55]

Only two bolts hold them up along with the double sided tape? Are some of the holes broken or that's just all you get?
I'm interested.

Are you sure you want these it looks like it's made for the gt4 bumper. Unless that's what you're getting.

[DEATH]

I like the cut better on these and fitment won't be a problem for me
Don't worry Chanh - you will see when I'm all done how beautiful the odd combination of parts looks together. I've heard the naysayers change their opinions before...

[Chanh55]

Just making sure you know what you're getting.

[azian_advanced]

these are replicas and generally don't have pre-drilled holes, you have to drill them out yourself.. but i figured two screws or bolts are sufficient and double sided tape along the top which i believe is necessary.

iirc, coomer's old yelliceli, which also has these trd replica splitters, have them hooked up with one bolt + double sided tape and are holding up well until now..

[azian_advanced]

SOLD! at waaay below cost...

/thread