 shift linkage |
  |
 Apr 7, 2008 - 5:24 PM
|
 
|
|
Enthusiast  Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%)  |
alright guys, its me again with yet another question. im pretty much ready to get the motor out of my car, but the shifter cables that hook up to the transmission brought me to a skreeching hault. i got the actual ends of the cables off, those are really simple. but where the cables are mounted on the tranny itself, i dont know what to do. anyone got any hints, or can tell me what to do.
|
|
Apr 7, 2008 - 5:36 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
-------------------- |
|
Apr 7, 2008 - 6:37 PM
|
|
|
Enthusiast Joined Feb 4, '07 From Ontario, Canada Currently Offline Reputation: 0 (0%) |
I had a lot of trouble with these as well. Mine were basically fused to the metal plate. I ended up hammering a putty knife between the clip and the plate to break them free a bit, then used a prybar to get the started. Hook the tip under the c-clip's 'legs' and pry up.
http://www.flickr.com/photos/25418806@N06/2394865964/ |
|
Apr 8, 2008 - 2:14 PM
|
|
|
Enthusiast Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%) |
thankx alot batman! i had a can of this stuff sitting in my basement. sprayed on, and like you said BAM!!!! so easy.
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2025 - 3:54 PM |