 fender removal? |
  |
 Apr 5, 2008 - 7:51 AM
|
 
|
|
Enthusiast  Joined Feb 6, '08 From portland or Currently Offline Reputation: 1 (100%)  |
ok i was trying to pull my fender but had no luck. 3 bolts under the hood. 1 in the door jam. 2 on the bottom. and 3 to the bumper. where is the rest of them?
|
|
Apr 9, 2008 - 3:11 AM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
If you want an illustration go to like 1sttoyotaparts and see how the fender comes off. Because the image breaks down the parts.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
Apr 9, 2008 - 3:23 AM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
wheel wells???? might have to kick them off, they're probably frozen there pretty good.
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
|
Apr 9, 2008 - 9:57 AM
|
|
 Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
yeah, splash guard holds a few, plus, under your headlight; the fender plugs into that bracket. looks just like the bracket that holds your bumper lip to the fender. NOt sure if there are any nuts attached; my celica didnt come fully assembled...
 But that headlight bracket is a bigger pain than the bumper>fender bracket. Have fun with that one!! -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)  Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
Apr 10, 2008 - 12:22 AM
|
|
 Enthusiast Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) |
Fenders are complicated. To removed them, you need to remove the Low Beam, to remove the Low Beam you need to remove the front bumper. Sounds like the ones D-Man is talking about are the ones you're missing. There should be 2 bolts on a bracket by the low beam and then that prong on the Low Beam that plugs onto the fender. And ofcourse all the fender plastic screws.
--------------------  |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 4:00 AM |