C-one bumper fitting., ASAP Options

[SeverX13]

hey can anyone get me a picture of how it is mounted on the top. and how snug it is to the headlights? also what all would be needed to trim?

This post has been edited by SeverX13: Apr 16, 2008 - 7:36 PM

[MaskedMan]

If it's a C-One bumper then it's going to be a really good fit. If it's a knock off bumper, then most of them will fit on differently depending on where you ordered it from.

[block]

yeah maskedman is correct. if it's the real C-ONE, should fit perfectly. if it's a knock off, good luck you might need a shop.

[SeverX13]

i know this...i probably should have put replica. but anyway, cany anyone take a picture of how their replica c-one is mounted on the top. and tell me what was shaved? thanks.

This post has been edited by SeverX13: Apr 17, 2008 - 6:21 AM

[D-Man]

maybe you can take a picture of your knock off and i can tell you what to shave.

Not being a smart-ass but really; If you go the cheap route, you kinda-gotta know how to get your hands dirty. Dont be afraid to try, see what dont belong, cut, bend, tear, rip, dremel, drill, hammer, bang and Fcuk untill it fits perfectly!

[SeverX13]

maybe you can take a picture of your knock off and i can tell you what to shave.

Not being a smart-ass but really; If you go the cheap route, you kinda-gotta know how to get your hands dirty. Dont be afraid to try, see what dont belong, cut, bend, tear, rip, dremel, drill, hammer, bang and Fcuk untill it fits perfectly!

haha i hear ya man, but i need a pic of how its mounted adn then me and my body guy can figure out the rest. just the top mount part. im sure im gonna have to shave around the high beams, and probaly stretch it

[D-Man]

Well, it's not going to fit too much differently from your OEM bumper; so use that as your guide. it's obviously going to have to follow a certain order; just because some things need to do their jobs... starting from the hood, the next layre woudl be that shock bar, then would come your bumper, then would go into your rad. bar; and from there it's all still stock.

[SeverX13]

Well, it's not going to fit too much differently from your OEM bumper; so use that as your guide. it's obviously going to have to follow a certain order; just because some things need to do their jobs... starting from the hood, the next layre woudl be that shock bar, then would come your bumper, then would go into your rad. bar; and from there it's all still stock.

do i need the grey bar in the center? i took it off, idk if its really needed or not

[D-Man]

there is on that kinda absorbs shock when you close your hood. You are deff going to want that one. Otherwise, you're going to end up cracking your fiberglass.

Grey bar? Your not talking about your hood lach hook are you? Unless you have pins, you NEED a hood latch hook. (Unless your not driving anywhere )

[SeverX13]

there is on that kinda absorbs shock when you close your hood. You are deff going to want that one. Otherwise, you're going to end up cracking your fiberglass.

Grey bar? Your not talking about your hood lach hook are you? Unless you have pins, you NEED a hood latch hook. (Unless your not driving anywhere )

no its the big bar in the center when u remove your stock front bumper. can u open ur hood and take a pic of how the bumper is mounted for me?

[MaskedMan]

there is on that kinda absorbs shock when you close your hood. You are deff going to want that one. Otherwise, you're going to end up cracking your fiberglass.

Grey bar? Your not talking about your hood lach hook are you? Unless you have pins, you NEED a hood latch hook. (Unless your not driving anywhere )

no its the big bar in the center when u remove your stock front bumper. can u open ur hood and take a pic of how the bumper is mounted for me?

Wait wait, are you talking about your crash bar? I would strongly recommend that you keep that on there.

[D-Man]

Yes i can, but you wont get it for a few weeks.

My internet is tured off at my house now. (cable and phone too Damn comcast...)

But if you wanna PM me your cell number; i can send it to you that way

[SeverX13]

ok so do i put bolts in all places where the stock ones were? i hafta drill my own holes

[supershannon77]

Thats your crash bar ..you want that on your car...that is very important imo just in case your every in an accident.