TEIN GST86-B1SS4 coilovers, Installed!!!! pictures inside :) Options

[malpaso]

At last I have received TEIN super street coilovers for my celi ...









Hope on Monday I will manage installation and of course take some pictures . Only issue I have is setting . I have received only Japanese manual so I do not know how to set rate (hard/soft) or height and do not make mistake or something... just in case... anyone here knows?

This post has been edited by malpaso: Apr 14, 2008 - 1:23 PM

[D-Man]

Looks good! have fun with those

[playr158]

up and down is super easy.
@ the bottom of the spring you see 2 green perches that have the "teeth" type deal, spin the bottom perch left (down) then you can adjust the upper perch that the spring sits on, Just make sure to count threads and ensure that L & R thread counts match so you have an even ride high. Then once you have the upper set correctly spin the bottom perch back up to the upper perch once they are snug together, spin the bottom right and top left at the same time so they "lock" together.

and i think if you remove the black cap on the very top of the assembly you will see the dampening adjustment

[2bcelica]

dude how much - and i wonder if this would fit the st204 us version -- give us some reviews once installed.

[playr158]

those should fit the US celicas

[nik]

i want lol

[xs94st]

nice man, i aspire for a set sometime before the end of this year..hopefully. keep us informed on the install n mas pictures por favor!

[GotToyota]

Wait, the rear doesn't have camber adjustability? How are you supposed to change the camber in the rear?

[frisp]

Have these on mine, superb piece of kit.

I did not have to adjust any rear settings on mine after fitment, the laser alignment gave me a spot on reading.

[zero07]

"Drool" I'm jealous.

[airfron]

oooohhh

I cant wait to get my coilovers.

[_mikeE]

LUCKY!! Also I see your have the pillowball mount on yours hheeh, but heard those were for the ST202 models, they should also work with the st204's right? Anyway, jealous that you got those, Hopefully I'll get myself a set in the future but for now I'll just kick it with my KYB's, tein springs........and cusco mounts yeee just bought'em can't wait to install.

This post has been edited by _mikeE: Apr 11, 2008 - 9:08 PM

[malpaso]

To D-Man: I hope so my stock upper mounts started knocking so I had to decide... new upper mounts now and new shocks soon (since I have almost new Tanabe springs on now) or just put money on coilovers.
To playr158: thanks a lot... it sounds easy. You know since it's for JDM model kit I have received it with Japanese manual only!!! There is no a single word in English on it. I hope I will not make any mistake during installation...
To 2bcelica: I hope they fit ST204 suspension because my AT200 has the same one . That means if I fit them, it's tested for US models as well . And price. I have payed $1880 shipped (paypal fees included). It's big and heavy box (31kg~68pounds) so shipping is not cheap
To xs94st: you bet I will post as much as I can. I have put my money to prove ST202 kit will fit AT200/ST204 as well so I want to share!
To GotToyota: I hope I will not need that camber adjustability for rear... I mean I hope if it's tailored for ST202 and it's fine it will be fine for AT200 as well...
To frisp: so you should tell more about that dampening adjustment... or have you received manual in English? I see you are from Scotland so you should be more lucky with that manual
To airfron: me too I'm bit sad I have swapped Tanabe brand for TEIN. Sustec pro II must be amazing! Pity they do not sell it with upper mounts . That's the main reason why I have bought this kit.
To _mikeE: exactly... those pillows made me buy it. There are only two kits with upper mounts included for 6gc on market. K2 G4 and those TEINs I have.

[808celica]

WOOOT! for teins.........lolz

[frisp]

I didn't get a manual with mine, all I did was set all shocks to "click" adjustment 10 from the lowest setting, then adjusted from there by how the car felt and behaved on the road. I'm still using position 10 by the way.

[GotToyota]

Malpaso: I'd be surprised if you didn't need to adjust the rear camber. I lowered my car with lowering springs, and the camber all around the car was changed. This is why I like the Ksport/D2's, because they have the camber pillowball mounts on the front and rear coilovers.

[joehernandez]

OMG!!!
i want some of those!
can u tell me where u live so i can go and take them (borrowed of course)

[808celica]

Malpaso: I'd be surprised if you didn't need to adjust the rear camber. I lowered my car with lowering springs, and the camber all around the car was changed. This is why I like the Ksport/D2's, because they have the camber pillowball mounts on the front and rear coilovers.

lolz my camber was bad w/o my drop so when i put my springs on its all better now
have fun installing........

[malpaso]

Today is that great day I put my new suspension on . Looks amazing and drives amazing! Unbelievable change... So theory is confirmed. ST/GT struts (I mean Euro ST/GT) are fully compatible!!! That means anyone with ST204 can use JDM GT shocks! Swap was so easy... real plug and play job. Even my audience was bored how easy it was . Get ready... here are few pics for you

First my audience...

...that dog was really everywhere

Here just removing stock shocks...


...and preparing ride height on new ones.


As you see everything fits perfect.






The same for rear. First remove old ones...


...and fit new ones.



Plug and play... everything to single bolt.

Here all finished. Front is dropped more than rear (about 10mm).


And finally my audience totally bored

[808celica]

cool dogs. yeah my dog was the same.........what setting you running??