Celi ST on small racetrack Options

[Hafkai]

some weeks ago i noticed that there is a small racetrack not far away from me so i decided to get there and drive some rounds
here are some videos i made with a cheap webcam.. video1 and another in better quality with revs and sideforce in g video2

[Hafkai]

i made some new videos, this time with my digicam
good quality video [25mb]
not so good quality video ..
and another one i made som weeks ago video2

the tires are 205/55/15 Bridgestone Blizzak LM22, they're not bad for winter tires

[Daftboy]

very nice ...i wish there was a track by me

[playr158]

Sweet a 6th gen on a track, very nice!

[Hafkai]

some new stuff from last Sunday, one lap incar Video
2 laps recorded from outside Video and one lap with PictureInPicture incar Video
and some pics

[bccentaur3]

The video out of the car showing the car going around the track is 20x better than the one in car. I would have to say that your car is looking good. What suspension mods do you have done?

Okay checked your profile, K sporty coilovers and trd strut bar. No anti roll bars?

[Hafkai]

..No anti roll bars?

its not easy to get some here in germany for the celica but i think the stock bars are good enough and i dont get much body roll with the k-sport suspension

[jason]

looks pretty descent to me without the stabilizers. sway bars should be used to compliment the springs/shocks, you shouldnt rely on them alone to stiffen cornering. if its fine enough as it is, no need to add any change, especially if its gonna cost you big $$$ to get them where you are

[Razgriz]

great videos!
i love seeing that there are ST's out there that are used for more than grocery getters.
car looks like in good shape! Wish i had the money to fix a few things so I can take mine out for a few laps.

btw what program/sensor are you using to collect, record and playback the data on screen?

-Razgriz

[Hafkai]

btw what program/sensor are you using to collect, record and playback the data on screen?

the data is recorded with an Innovate LMA-3 and a laptop, the software for playback is Logworks 3, i record this with HyperCam 2 and insert it with PowerDirector in the incar video

btw.. it looks like i killed a wheel bearing last sunday.. perhaps to much sideforce but i got some very good lap times...

[Hafkai]

new wheel bearing, new videos.. i changed the camber i little bit, front around 1° und rear around 1.4°
the car drives very neutral, not much understeer and the back is very stable, the car moves over all 4 wheels at limit, the only weak point(besides engine ) are the brakes, got some Brembo MAX rotors and Textar pads, the brake pedal gets very soft after 2 turns with average braking
first video is a complete turn, some laps in front of a Clio RS and the rest trying to follow him(around 170hp/1110kg) link
and one lap behind the Clio with rpm, speed, afr and sideforce link

[cHinaman727]

Cool, I get to see what my car would look like on a trck

[Hafkai]

I got some new videos, this time from the Eurospeedway Lausitzring, a 4.5km long racetrack.
Its very different to the other small racetrack, very fast corners and much longer straight sections. This track kills brakepads, i got some cheap but not bad pads and killed them in only 3000km its time for the 304mm K-Sport brake

incar video
short video of the day

[Stambo]

that looks like so much fun. I'm trying to figure out how to mount my camera in my car for autocrossing. Any ideas on how too without just having my buddy hold it in the passenger seat?

[Tigawoods]

get a vac suction mount and place it anywhere on the car



http://www.filmtools.com/gripsuccupca.html

i ordered one. we will see!

[Stambo]

thanks tiga, you seem to always have the answer for anything. I guess we'll have to wait till next month till i get that for filming autox.

[Hafkai]

http://www.filmtools.com/gripsuccupca.html

That looks good, much better then those i found in germany. I still need a good mount for the cam in the car, my selfmade mount is shaking allot and a passenger holding the cam isnt that good too .

I adjusted the suspension a little bit and set camber in front to 2.4°, thats alot for daily driving but on the track perfect, i got a bit more sideforce and the car feels much better when going in the turn, now i need to find a good tire pressure, at the moment i'm driving with 2.5bar on all tires resulting in 3.0bar after a turn and thats overkill. Next time i set front to 2.1bar and back 2.2-2.3bar, i hope this will give me a little more grip in corners when the tires are warm.
The next thing i'll do is installing a TRD front strut brace, i'm very curious how much it will do for cornering performance.

[stryue_19]

nice vid... how's it like on the track?

[Hafkai]

I finaly get the TRD strut brace, just need to get some bolts for the firewall. And i have 2 new videos from last tuesday from the Eurospeedway, the complete turn link and 2 laps with speed, sideforce, afr and rpm link (63mb)

[Stambo]

where'd you find that strut brace at? link?