5sfe ECU plug/wiring Options

[Terracar]

Hello,

I apologize if this should have been posted to off topic as this is for a 5sfe ST184.

Here is situation:

car = 91 Celica GT-S (5sfe)

I swapped over a 93 (5sfe) engine/ecu/engine wiring harness - smooth sailing until I swith ECU over.

There is a chassis plug that goes to the ECU that on the '91 GT-S is 14pin and is only 12pin on the '93 GT ECU. I have been looking through the chilton manual for an hour but they have mroe electrical diagrams than I can shake a stick and have been unable to locate one for ECU plugs.

This plug branches off from the chassis wiring harness that is way up in the dash so I would like to just re-pin it if necessary.

Other odd ball things that may be important -

'91 =

Climate Control A/C
Sunroof
ABS

'93 =

Standard A/C
No sunroof
Non-ABS

Both are manual transmissions

If you could point me in the way of a electrical diagram that would be of great assistance or even what page in the Chiltons 86-93 Celica Repair maunal (for US and Canada models) -

Thank you for your time and I apologize if I posted in wrong section

-Terracar
_________________
'08 Legacy SPec. Ed. "Lacey"
'05 Galant LS 3.8L "The Beast"
'91 Celica GT-S "The driveway placeholder"
'93 Celica GT "Shorty"

[presure2]

www.celicatech.com