FS 1995 ST Parting Out Options

[Striking4]

Hey everyone. I had this topic up a few months ago and had talked to several of you about parts that you were interested in. I had a family emergency come up and so this got put on the back burner for a while. Sorry for letting you guys down. Things are now back in order, so if you are interested in items off of this car, let me know. Thanks guys.

Denzel

[daazndood]

Hey everyone. I had this topic up a few months ago and had talked to several of you about parts that you were interested in. I had a family emergency come up and so this got put on the back burner for a while. Sorry for letting you guys down. Things are now back in order, so if you are interested in items off of this car, let me know. Thanks guys.

Denzel

what is the number on the magnaflow muffler? are the spring sportlines? how many miles on the springs and shocks?

[njccmd2002]

swaybars, would they fit a gt

do you still have the quickshifter

[Rider]

Do you still have the clear turn signals for the front?

[CelicaST_CALI]

how much for that front strut bar??also on of the vent above the stereo system

This post has been edited by CelicaST_CALI: Mar 31, 2008 - 10:23 PM

[MaskedMan]

Interested in the rear bumper, how is the condition of it?

[6strngs]

interested in the clock, or actually just the plastic and rubber pieces which make up the buttons for the clock, but if it's easier for you I'll take the whole clock.

[black13]

I'll take everything for manual swap for my ST (your quickshifter/shift cables, pedals etc...)
Ready to pay asap.

[snapshotgt]

Please post here if you have any of the following items.

Interior:

1.) Dead pedal (foot rest) with install clips
2.) Armrest hinge
3.) Radio trim
4.) Shifter trim (that surrounds it manual shifter)
5.) Drivers side (left) vent trim
6.) Steering column bottom, and possible top plastics
7.) Plastic door plugs/clips (on edge)

Exterior:

9.) Front wheel wheel (both) plasic gaurds
10.) Underbody engine plastic gaurds

Thanks-

From this thread: http://www.6gc.net/forums/index.php?showtopic=57258

[Striking4]

Ok guys. Here's the stuff that I have left and what I am looking to get out of them. Prices do not include shipping and are sold as is. If you have any questions or are interested, please PM me or send me an email at Striking4@hotmail.com. I check my email more regularly than my msgs on this site, so try hittin me up there.

Eibach Sportline Springs (top ends for front have been clipped by a couple inches to lower them even more)
$125 for all four or $75 for just front or back

Shocks - $35 each or $125 for all four

White guages with dimmer - $40

Front Bumper - $100

Rear Bumper - $100

Front Fenders (reflectors have been shaved smooth and look badass) $110 each or $200 total

TRD Quickshift - $100

Shift Cables - $40

Strut Tower Bars - $60 each or $100 for both front and back

Magnaflow Muffler - $75

Exhaust Manifold Plate for custom header - $30

Hood - $100

Trunk Lid - $75

Rear Spoiler - $40

I have tons of other stuff too, to include plastics, engine parts, interior misc parts, pretty much anything you want. Please PM me or write me at the email address listed above. First come first serve. Look forward to helping each other out. Thanks guys.

Please post here if you have any of the following items.

Interior:

1.) Dead pedal (foot rest) with install clips
2.) Armrest hinge
3.) Radio trim
4.) Shifter trim (that surrounds it manual shifter)
5.) Drivers side (left) vent trim
6.) Steering column bottom, and possible top plastics
7.) Plastic door plugs/clips (on edge)

Exterior:

9.) Front wheel wheel (both) plasic gaurds
10.) Underbody engine plastic gaurds

Thanks-

From this thread: http://www.6gc.net/forums/index.php?showtopic=57258

I have all the stuff in the first part of your list except the plastic door plugs. I might have those, I'm just not sure what you are referring to. For all the other parts I would part with for $80 plus shipping which shouldn't be too much cus everything is pretty light. What is your zip? Let me know if you are interested. Thanks.

I'll take everything for manual swap for my ST (your quickshifter/shift cables, pedals etc...)
Ready to pay asap.

$165 plus shipping. What zip code?

interested in the clock, or actually just the plastic and rubber pieces which make up the buttons for the clock, but if it's easier for you I'll take the whole clock.

Yeah, I will probably just do the whole clock, that way you can get all the pieces you need instead of me forgettin something. $25 plus shipping. What zip?

Interested in the rear bumper, how is the condition of it?

It is in good condition. No major damage. It is the light blue color. $100 plus shipping. What zip?

[MaskedMan]

My zip is 91770. i am also interested in a few other things. Do you have the lever you pull to release the trunk and gas door? Do you have the ashtray as well?

[Striking4]

My zip is 91770. i am also interested in a few other things. Do you have the lever you pull to release the trunk and gas door? Do you have the ashtray as well?

Ok, I will check on shipping for the bumper. And yes I have those other parts. The ashtray I will just give you cus one of the arms that attaches the lid is kinda broken. I will get rid of the levers for $20 and just ship them with the bumper.

[goferris]

hey i'm local (kinda lol) and am interested in the strut bar, interior plastic trim (shifter surround, radio surround, driver's side and passenger side vent.) and perhaps the TRD shifter. front seats too (atleast the material so i can make a pattern to re-upholster mine)
i could set up a weekend to come pick them up. let me know.

This post has been edited by goferris: Apr 1, 2008 - 10:33 PM

[Striking4]

hey i'm local (kinda lol) and am interested in the strut bar, interior plastic trim (shifter surround, radio surround, driver's side and passenger side vent.) and perhaps the TRD shifter. front seats too (atleast the material so i can make a pattern to re-upholster mine)
i could set up a weekend to come pick them up. let me know.

Sweet, yeah you need to come down to where it is warm, lol. Which strut bar do you want, front or rear? I have all the plastics, but have some other people interested in them, so first one to arrange and pay will get them. Same deal with the shifter. The front seats I am keeping cus they are going into a sandrail that I am building.

[goferris]

front strut bar

[6strngs]

I sent you a PM. interested in fenders as well as clock.

[CelicaST_CALI]

how much for that front strut bar??also on of the vent above the stereo system

[joehernandez]

pm sent

[56willysnut]

I need a R/H low beam light assembly, do you have one?

[Maserat31]

taillights??