6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Interchangeability of 5th and 6th gen springs?
post Jun 23, 2008 - 12:31 PM
+Quote Post
GotToyota



Enthusiast
****
Joined Apr 15, '07
From Fort Worth, TX
Currently Offline

Reputation: 12 (100%)




Will 5th gen springs work on a 6th gen? Long story short, I can get a good deal on some ground controls that this guy had on his 5th gen, and they should be the same right? On most sites I see for springs, it always says 90-99.

-Matt
post Jun 23, 2008 - 12:40 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




Yeah, I believe 5th and 6th are interchangeable as long as it's FWD and not AWD


--------------------
post Jun 23, 2008 - 1:27 PM
+Quote Post
GotToyota



Enthusiast
****
Joined Apr 15, '07
From Fort Worth, TX
Currently Offline

Reputation: 12 (100%)




Now what about the ground control springs? They look like different sizes compared to the 6th gen springs:



These are the ones in question.

This post has been edited by GotToyota: Jun 23, 2008 - 1:28 PM
post Jun 23, 2008 - 2:28 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




I'm not sure about the answer to this - these are coil-overs, right? That's different than regular springs, isn't it?
Maybe research part numbers and see if they come up the same?


--------------------
post Jun 23, 2008 - 5:17 PM
+Quote Post
GotToyota



Enthusiast
****
Joined Apr 15, '07
From Fort Worth, TX
Currently Offline

Reputation: 12 (100%)




QUOTE (GriffGirl @ Jun 23, 2008 - 2:28 PM) *
I'm not sure about the answer to this - these are coil-overs, right? That's different than regular springs, isn't it?
Maybe research part numbers and see if they come up the same?

They're Ground Control springs, meaning they're meant to go on Celica struts. This means they should fit, right?
post Jun 24, 2008 - 8:32 PM
+Quote Post
Bee8

Enthusiast

Joined Jun 14, '08
From Toronto
Currently Offline

Reputation: 0 (0%)




QUOTE (GotToyota @ Jun 23, 2008 - 1:31 PM) *
Will 5th gen springs work on a 6th gen? Long story short, I can get a good deal on some ground controls that this guy had on his 5th gen, and they should be the same right? On most sites I see for springs, it always says 90-99.

-Matt


In a related question, does anyone know if shocks from a 5th generation will work on a 6th generation? Also, are there any other parts that can be used interchangeably between the two generations? Here in Canada, 5th generations are fairly cheap and common whereas 6th generation are very rare and generally expensive. Thanks. Any light shed on this would be greatly appreciated.
post Jun 25, 2008 - 2:30 AM
+Quote Post
trdproven



Enthusiast
*****
Joined Aug 2, '05
From Guam
Currently Offline

Reputation: 15 (100%)




They are called coilover sleeves.


--------------------
94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi|
|Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto|
|Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8
04 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|

89 Supra (Sold)
90 Supra (Sold)
post Jun 26, 2008 - 3:24 AM
+Quote Post
808celica



Enthusiast
*****
Joined Feb 24, '07
From Oahu, Hawaii
Currently Offline

Reputation: 23 (100%)




doubt the shocks will work i looked at my friends suspension to see if i could fit my teins on there so i could get tanabe full coils biggrin.gif but its different........i wouldnt chance something that keeps you planted on the road.


--------------------
I don't normally drive fast, but when I do its on a curvy section of this island
post Jun 26, 2008 - 4:17 AM
+Quote Post
azian_advanced



Enthusiast
*****
Joined Apr 18, '05
From Calgary
Currently Offline

Reputation: 20 (100%)




i fit 6th gen rear shocks on my 5th gen no problem.. but the other way around, i don't see why it won't work

This post has been edited by azian_advanced: Jun 26, 2008 - 4:17 AM


--------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
post Jun 27, 2008 - 3:33 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




Yeah, I actually don't know off hand about the shocks, I just know that the springs are interchangable between generations. Try a parts search for shocks on like tirerack.com or something, then plug in the same search for a 5th gen and see if it returns the same part number


--------------------

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 30th, 2024 - 2:05 PM