 Radio Problem |
  |
 Jul 14, 2008 - 1:37 AM
|
 
|
|
Enthusiast Joined Jul 7, '08 From Hallandale Beach Currently Offline Reputation: 0 (0%)  |
Here it foes i mounted my new panasonic radio on to my 94 st celica i used the diagram to connect all the cables and bam working and set up the settings but then when i turned off the car and back on the next day i saw my settings where back to default when i went and tested the cables i found out that there is a problem my v12 constant if i not mistaken is not sending any power ar my radio's setting go back to default once the car trun off and the key is not on the ignition
any ideas? |
|
Jul 15, 2008 - 9:59 PM
|
|
|
Enthusiast  Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) |
Check the fuse. Should be a 20 amp (radio no. 1) the switched 12v comes from the (cig & rad) 15amp.
If the fuse is ok it's either a broken wire or you connected to the wrong wire. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 3:33 AM |