This is a GREAT question...lighting, interior lights |
This is a GREAT question...lighting, interior lights |
Sep 10, 2003 - 12:05 PM |
|
Enthusiast Joined Mar 9, '03 From Knoxville,TN Currently Offline Reputation: 0 (0%) |
Ok....I know there is a way to change the gauge cluster lights but what about the lights that have the air control knobs and buttons on them next to the cigarette lighter. If you could change those bulbs that would be sweet. I might try to do that but I was just wondering if it has been tried by anybody... thanks!
|
Sep 10, 2003 - 2:19 PM |
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
People have done it, but it involves lots of soldering and is very tough to do from what I hear, because everything has to be very precise.
-------------------- New Toyota project coming soon...
|
Sep 10, 2003 - 3:17 PM |
|
Enthusiast Joined Dec 26, '02 From Alabama Currently Offline Reputation: 2 (100%) |
I'm sure you could use some kind of light filter and get similar results though... maybe. : )
Jon |
Sep 10, 2003 - 6:18 PM |
|
||
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
Do you mean like painting the clearish plastic parts with transparent paint? -------------------- New Toyota project coming soon...
|
||
Sep 11, 2003 - 6:37 PM |
|
Enthusiast Joined Oct 3, '02 From Va Team 6gc Currently Offline Reputation: 1 (100%) |
Doggy showed pics of his when he had changed them. He said its easy but he wouldn't tell us how he did it because charlie was going to start selling kits around that time.
-------------------- All I have in this world is my Balls and my Word and I'm not breaking em for no one,- Tony Montana Team 6gc 2005 |
Sep 16, 2003 - 7:17 PM |
|
Enthusiast Joined Aug 22, '03 From Richmond, Virginia Currently Offline Reputation: 0 (0%) |
i changed the color on a 7th gen a while back, which is quite similar to 6th gens. i used PIAA led bulbs in hyper blue, and basically had to build my own wiring harness for them (194 bulbs), lots of soldering and custom gluing and all that, but it turned out sweet. if your good with a soldering gun and have some free time, try it, its not super tough. good luck
|
Sep 18, 2003 - 12:59 PM |
|
Enthusiast Joined Jul 8, '03 From Dallas, TX Currently Offline Reputation: 0 (0%) |
Wonder if somebody managed to remove the climate control panel to change the lights...i cant get past the black and blue cables holding it to the dash...
|
Sep 18, 2003 - 2:32 PM |
|
Enthusiast Joined Mar 21, '03 From Pittsburgh, PA Currently Offline Reputation: 0 (0%) |
To get the climate controls out, you have to follow the black cable through the firewall and disconnect it on the other side, it should be right in front of the steering wheel but inside the engine bay. The blue cable can be disconnected inside the car by climbing under the steering column and looking under the console, you can't miss where it hooks up, just disconnect those and the whole unit should come out. The only problem I ran into was with the colors lights on the vent controls, the pictures on the vent controls themselves changed colors, but the little rectangular green lights that show you which vents are blowing look to be seperate and I cant get em changed. Sorry for the novel but it drives me nuts. Anyone have a solution??
|
Lo-Fi Version | Time is now: November 24th, 2024 - 9:23 AM |