 What parts can or cant buy here in US for 3 Gen 3s? |
  |
 Sep 6, 2008 - 5:59 PM
|
 
|
|
Enthusiast  Joined Aug 29, '07 From San Diego Currently Offline Reputation: 0 (0%)  |
Well I am about to buy a front clip with 3rd gen 3s but I was thinking that I want to replace gaskets and misc parts but do all the 2nd gen parts fit on the 3rd gen 3sgte?
|
|
Sep 6, 2008 - 6:44 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE (erahman85 @ Sep 6, 2008 - 6:59 PM)  Well I am about to buy a front clip with 3rd gen 3s but I was thinking that I want to replace gaskets and misc parts but do all the 2nd gen parts fit on the 3rd gen 3sgte? www.kbox.ca carries a bunch of 3rd gen specific parts, there are a few threads with PT #s ect in it over on mr2oc. as well as the thread found here in the stickys. i suggest spending a bit of time reading thru those threads, there is lots of good information to be had if you search for it. http://www.6gc.net/forums/index.php?showtopic=56652 -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Sep 8, 2008 - 11:41 AM
|
|
|
Enthusiast Joined Aug 29, '07 From San Diego Currently Offline Reputation: 0 (0%) |
so all those parts listed are not interchangeable???
|
|
Sep 8, 2008 - 4:58 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
-------------------- |
|
Sep 9, 2008 - 5:59 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
for a beams and 3sgte engine they only had gasket set, what about pistons and stuff?
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Sep 9, 2008 - 8:23 PM
|
|
 Enthusiast Joined Aug 7, '05 From Columbus OH Currently Offline Reputation: 3 (100%) |
Pretty sure 2nd and 3rd Gen 3sgte motors share the same internal parts, so cams, valvetrain, headgasket, pistons, rods.
QUOTE (njccmd2002 @ Sep 9, 2008 - 5:59 PM) for a beams and 3sgte engine they only had gasket set, what about pistons and stuff? --------------------  |
|
Sep 9, 2008 - 8:41 PM
|
|
|
Enthusiast Joined Aug 29, '07 From San Diego Currently Offline Reputation: 0 (0%) |
Well that's good. I was looking to do some maintenance work before I put the engine in the car. So we'll see. I suppose I could buy the parts and if they don't fit I'll return them.
|
|
Sep 10, 2008 - 4:40 PM
|
|
|
Enthusiast Joined Jan 28, '07 From Québec, Canada Currently Offline Reputation: 1 (100%) |
pistons, rod, crank, exhaust cam, cam gears, valves, springs are interchangeable, you can interchange the gen3 intake cam with gen 2 on but you will loose some duration and some lift. For the Headgasket, toyota use different P/N for gen2 and gen3... but I guess they are interchangeable.
|
|
Sep 11, 2008 - 1:33 AM
|
|
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
QUOTE (pitcelica @ Sep 10, 2008 - 5:40 PM) For the Headgasket, toyota use different P/N for gen2 and gen3... but I guess they are interchangeable. sweet jesus no.  ^^st185 single layer paper type  ^^st205 multi-layer steel type and both  the 205 hg is 1.4mm while the 185 is 1mm and the 205 has more jacket holes. -------------------- |
|
Sep 12, 2008 - 2:17 PM
|
|
|
Enthusiast Joined Jan 28, '07 From Québec, Canada Currently Offline Reputation: 1 (100%) |
ok, thanks for the clarification, I was assuming that if you can put a gen3 head on a gen2 block, the headgaskets would be interchangeable.
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 11:32 AM |